Harrington & Richardson Topper Model 88 12 Gauge Single-Shot, 18.5 inch Barrel, 3 inch Chamber, Fixed Full Choke, Matte Tan, Synthetic Stock
This H&R Topper Model 88 is a break-action, single-shot 12 gauge configured with a uniform matte tan coating on the barrel and receiver and durable black synthetic furniture. It features a plain 18.5-inch steel barrel roll-marked FULL, a 3-inch chamber, and sling swivel studs. Made in Gardner, Massachusetts, it also carries period markings including a circled P on the barrel and a receiver patent marking.
Condition
Overall Condition: Good condition, showing some signs of prior use and handling.
Bore Condition: Good - Clean, well-maintained, minor wear marks.
Specific Condition Notes: There are markings from previous handling and use. The bore is bright and clean. Refer to the photos for a closer look at the surfaces and markings.
What’s Included
- Harrington & Richardson Topper Model 88 12 gauge single-shot shotgun (as configured)
The Topper Model 88 action is a simple break-open design with a top lever and an exposed hammer. It uses a single trigger and incorporates a transfer-bar safety and hammer block. Capacity is one round. The shotgun was made in Gardner, Massachusetts, USA.
The 18.5-inch plain steel barrel is roll-marked FULL and uses a fixed full choke. The chamber is 3 inches. The muzzle is drilled and tapped for a front bead; the bead is not present. There is no rear sight.
The barrel and receiver wear a uniform matte tan coating. Furniture consists of a black synthetic NEF-marked buttstock with recoil pad and a Choate synthetic forend. Sling swivel studs are installed at the forend tip and the butt. Length of pull measures 12.0 inches.
Markings include a circled P on the barrel and U.S. Patent No. 3,988,848 on the receiver. An AY serial prefix is present.