Thompson/Center Hawken .50 Cal Percussion Rifle, 28 Inch Octagonal Barrel, Double-Set Triggers, Walnut Half-Stock, Factory-Engraved Lock
This Thompson/Center Hawken percussion rifle stands out with its classic .50 caliber sidelock design, factory scroll engraving on the lock and hammer, and a walnut half-stock with brass furniture. It features a 28 inch octagonal barrel with a 1:48 twist, a hooked breech/tang for quick barrel removal, and open sights. Made in the United States and marked with the Thompson/Center Arms Rochester, New Hampshire barrel address, this reproduction Hawken captures the key details of the iconic plains rifle. SELLING AS IS.
Condition
Overall Condition: Poor condition.
Bore Condition: Good - Clean, well-maintained, minor wear marks.
Bore Rifling: Good Rifling - Intact, well-defined lands and grooves.
Specific Condition Notes: Selling as is. The hammer will not set when pulled back and drops by itself. The rifle should be taken to a qualified gunsmith for repair.
What's Included
- Thompson/Center Hawken .50 caliber percussion rifle
The 28 inch octagonal barrel provides the traditional Hawken profile, and the 1:48 twist is a versatile, period-appropriate choice for a .50 caliber muzzleloader. The bore is clean with good rifling, supporting its ready potential once the lock issue is addressed.
Its percussion sidelock action uses an external hammer with right-side lock placement, paired with a double-set, adjustable trigger system for fine control. The hooked breech/tang design allows quick barrel removal for maintenance and transport.
The walnut half-stock includes a cheekpiece and a classic patchbox with a hinged lid. Brass furniture is used throughout, including the buttplate, patchbox, nose cap, ramrod thimbles, and oval wedge escutcheon, giving the rifle an authentic look and feel. This rifle does not have a separate toe plate.
Factory scroll engraving on the lock and hammer adds a refined touch. The barrel and tang wear a blued finish, while the lock and hammer are color case-hardened; brass furniture completes the look. Sighting is handled by a dovetailed front blade and an adjustable open rear sight with an elevator. The length of pull measures 14.25 inches.
This reproduction Hawken is made in the United States. The barrel is marked with the Thompson/Center Arms Rochester, New Hampshire address, and the serial number is marked on the barrel. SELLING AS IS.