Remington Model 870 Wingmaster 12 Gauge Pump-Action, 18 Inch Plain Barrel, Cylinder Bore, 2 3/4 Inch Chamber, Wood Stock, Magazine Tube Extension
This Remington Model 870 Wingmaster is a U.S.-made 12-gauge pump configured with an 18-inch plain barrel and fixed cylinder bore, chambered for 2 3/4-inch shells. It features a steel receiver and classic wood furniture, along with an installed magazine tube extension and a barrel/magazine clamp.
The Wingmaster series is built on a steel receiver and uses a cross-bolt safety. This example is set up with a straightforward bead sight system and a grooved wooden fore-end for positive purchase during cycling.
The 18-inch plain barrel has a fixed cylinder bore and a single front bead, providing a simple, durable setup. The serial suffix "V" indicates a 12-gauge receiver designed for 2 3/4-inch shells, matching the barrel’s chamber.
The stock is wood with a straight comb and a ventilated recoil pad. Length of pull is 13.75 inches, offering a compact shoulder fit with traditional ergonomics.
Custom touches include a magazine tube extension and a barrel/magazine clamp already installed. The pump-action layout remains faithful to the Model 870 design, with the parts configuration tailored to this build.
Condition
Overall Condition: Poor condition.
Bore Condition: Poor - Noticeable dirt, stains, significant corrosion or damage.
Bore Fouling: Moderate Fouling - Lead or copper fouling with noticeable buildup.
Specific Condition Notes: There is rust and finish loss throughout. This item is sold as is and is not a functional firearm. It is a gunsmith special that needs restoration and repair. The trigger does not work, and the pump will only travel halfway to the rear. The stock is loose.
Rust and grime are present throughout, especially internally.
What’s Included
- Remington Model 870 Wingmaster 12 Gauge pump-action shotgun
- Installed magazine tube extension
- Installed barrel/magazine clamp
The 2 3/4-inch chamber aligns with the receiver’s "V" suffix marking and supports standard 12-gauge 2 3/4-inch shells. The fixed cylinder bore and bead sight setup provide a simple, rugged configuration. Wood furniture with a ventilated recoil pad and a 13.75-inch length of pull rounds out this classic Wingmaster profile.