Kahr Arms CW9 C-Series 9mm Compact DAO Striker-Fired Pistol, Matte Stainless Slide/Black Polymer, 3.6 in Barrel, 6+1
This Kahr Arms CW9 is a compact, single-stack 9mm from the C-Series, built in the USA with a matte stainless slide over a black polymer frame. It combines a 3.6 in barrel and a slim 0.90 in slide width with an unloaded weight of about 15.8 oz. The CW9 features Kahr's bar-dot sight system, conventional rifling, and straightforward left-side controls.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Overall Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: The pistol is in great shape overall with minor, superficial scratches and small blemishes visible under close inspection. The bore is clean and shiny.
What's Included
- Original case
- 1 Kahr factory 6-round single-stack steel magazine with flush baseplate
The CW9 operates with a DAO striker-fired, locked-breech system using a Browning-type tilting barrel. It uses a double-action-only trigger and incorporates a passive striker block. There is no magazine disconnect.
Dimensions are compact and slim: 3.6 in barrel, 5.9 in overall length, 4.5 in height, and a 0.90 in slide width. Unloaded weight is approximately 15.8 oz, and capacity is 6+1 with the included single-stack magazine. An offset feed-ramp design helps reduce overall width.
The slide is matte stainless with rear serrations and an external extractor; there are no front serrations. The black polymer frame houses a left-side slide stop and a left-side, push-button magazine release. There is no accessory rail.
Sights are the bar-dot style: a pinned polymer front with a white dot and a drift-adjustable rear with a white vertical bar. The barrel uses conventional rifling. C-Series traits on this model include the pinned polymer front sight and simplified slide markings.
Made in the USA, the frame is marked KAHR ARMS WORCESTER, MA.