IWI Jericho 941 RS9 Decocker 9mm Compact, Steel Frame, 3.8 in Barrel, Matte Black, 17+1 Capacity
This Israeli-made Jericho 941 RS9 Decocker is a compact, steel-frame 9mm with a 3.8 in nitrided, button-rifled barrel and a frame-mounted decocker. It features internal slide rails, fixed sights with a single-dot front, and an integral accessory rail. It comes with five 17-round magazines and the IWI factory case, making it a well-equipped example of the RS9 variant imported by IWI US.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: This pistol shows minimal markings from previous handling or use. The bore is bright and clean.
What’s Included
- IWI factory hard case with IWI logo and foam interior
- Owner's manual
- Smooth wood grip panels (installed)
- Spare grips
- Five 17-round magazines (IWI factory magazines and one Sarsilmaz magazine)
The RS9 Decocker variant pairs a compact-length slide and dust cover with a robust steel frame. Israeli manufacture is confirmed by the frame markings, and this example was imported by IWI US in Middletown, PA. The matte black finish is matched with smooth wood grip panels, a beavertail frame, and vertical serrations on the front strap for confident control.
The pistol operates in DA/SA with a frame-mounted decocker and an exposed spur hammer. The slide runs on internal rails and carries rear slide serrations. Its 3.8 in barrel is nitrided and button-rifled, with the hood marked 9x19. Fixed sights include a single white dot front blade and a low-profile rear set in a dovetail.
An integral accessory rail is machined into the dust cover. Capacity is 17+1 in 9mm, and this example includes five 17-round magazines. At approximately 2.3 lb without a magazine, it delivers the characteristic heft of a steel-frame Jericho.
Markings include the IWI US import stamp, IWI - ISRAEL frame mark, and a 2D data-matrix near the serial. The factory case label notes the decocker configuration, 9mm chambering, and 3.8 in barrel, aligning with the pistol's features.