Weatherby Mark V Accumark Elite .30-378 Wby. Mag. Bolt-Action Rifle, Coyote Tan Cerakote, Fluted Threaded Barrel
This Accumark Elite pairs Weatherby’s magnum Mark V action with a stainless, fluted, threaded barrel and a carbon-fiber stock featuring an adjustable cheekpiece. Chambered in .30-378 Wby. Mag., it carries the factory SUB-MOA accuracy guarantee, wears a durable Coyote Tan Cerakote finish.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: Minor, superficial scratches and small blemishes are present on exterior surfaces.
What’s Included
- Weatherby factory cardboard box (serialized end label shown)
- Weatherby owner's manual
- TriggerTech trigger manual
The left-hand Mark V magnum action uses a 9-lug bolt with a short 54-degree bolt lift for fast cycling and strong primary extraction. The internal box magazine with a hinged floorplate is configured for the .30-378 Wby. Mag. cartridge.
The stainless #3 contour barrel is fluted, threaded 5/8x24. Rifling is 1:10, and the bore presents a clean, mirror finish per the condition notes.
The stock is carbon fiber with an adjustable cheekpiece, a vertical grip, a recoil pad, and sling-swivel attachment points (two front studs and one rear). Length of pull is 13.5 in and the rifle incorporates a bolt-shroud safety.
Metalwork wears Weatherby’s Elite/Coyote Tan Cerakote, with the bolt and knob finished in Graphite Black. There are no sights; the receiver is drilled and tapped for scope bases. Factory markings include “MARK V MADE IN U.S.A.” and “WEATHERBY SHERIDAN, WY,” and the rifle carries Weatherby’s SUB-MOA accuracy guarantee.