Steyr AUG A3 M1 5.56 NATO Bullpup, 16 in CHF Quick-Change Barrel, Extended Top Rail, Tan, Dead Air DA301, 5 Mags
This Steyr AUG A3 M1 is a modern bullpup configured with the extended top rail and standard AUG magazine stock in a tan finish. It features a 16 in cold hammer forged, quick-change barrel with Mannox/nitrided treatment and an installed Dead Air DA301 three-prong flash hider/suppressor mount. Right-hand ejection, a left-side charging handle, and U.S. assembly in Bessemer, Alabama round out a feature set that is ready for serious use. It ships with five AUG-pattern magazines.
Condition
Overall Condition: Excellent condition, showing only faint signs of any prior use or handling.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: There are minimal markings from previous handling and use. The bore is bright and clean. Refer to pictures.
What’s Included
- Steyr AUG/A3 M1 owner's manual
- 1x 42-round AUG-pattern polymer magazine
- 4x 30-round AUG-pattern polymer magazines
- Dead Air DA301 flash hider/suppressor mount (installed)
The AUG A3 M1 layout keeps the action behind the trigger for a compact overall length of about 28.15 in while retaining a 16 in barrel. This rifle uses a semi-automatic, short-stroke gas piston system with an adjustable two-position regulator, paired with a left-side charging handle and a cross-bolt safety for straightforward operation.
The 16 in steel barrel is cold hammer forged, Mannox/nitrided, and quick-change. The barrel unit includes a folding vertical foregrip and a threaded muzzle wearing a factory-marked DA301 device, which is the Dead Air flash hider/suppressor mount included with this rifle.
An extended Picatinny top rail runs the length of the receiver, complemented by a right-side accessory rail. The stock is the standard AUG magazine configuration and is molded polymer in tan (mud/FDE). Sling mounting is supported by a front QD socket and a rear sling loop.
The receiver is aluminum with a Hard Eloxal hard-anodized finish, and the rifle is assembled in the United States in Bessemer, Alabama. Right-hand ejection is configured from the factory, with the left-side ejection port cover installed. Empty weight is approximately 7.7–7.8 lb, and length of pull is 15.0 in.
Chambered in 5.56mm NATO, this AUG includes one 42-round and four 30-round Steyr AUG-pattern polymer waffle magazines, supporting a capacity of 42+1 with the included extended magazine.