Daniel Defense DDM4 V7S SBR 5.56 NATO, 11.5 in CHF Chrome-Lined Barrel, MFR 10.0 M-LOK, 1/2x28
The Daniel Defense DDM4 V7S is a compact, US‑made SBR built around an 11.5 in cold hammer forged, chrome‑lined CMV barrel and a free‑float MFR 10.0 M‑LOK handguard. It uses a carbine‑length gas system with a pinned low‑profile gas block, an H‑weight buffer, and an M16‑profile BCG for dependable operation. Enhanced receivers, an ambidextrous GRIP‑N‑RIP charging handle, and a 5.8 lb unloaded weight round out a well‑equipped package.
Condition
Overall Condition: Excellent condition, showing only faint signs of any prior use or handling.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Rifling: Excellent - Sharp lands and grooves.
Specific Condition Notes: This example shows little sign of prior use, and function is as expected.
What's Included
- Daniel Defense hard rifle case
- DD4/DDM4/DD5 Firearms Operation & Safety Manual
- Daniel Defense M-LOK vertical foregrip (installed)
- One 32-round polymer magazine (brand not specified)
The 11.5 in barrel is chrome‑moly‑vanadium steel that is cold hammer forged, chrome‑lined, government profile, and HP/MPI tested with a phosphate finish. It uses a 1:7 twist and 1/2x28 threading capped with a three‑port flash suppressor. A carbine‑length gas system and pinned low‑profile gas block are matched with an H‑weight carbine buffer for balanced cycling.
The free‑float Daniel Defense MFR 10.0 handguard is 6061‑T6 aluminum with M‑LOK slots and an uninterrupted 1913 top rail with T‑marks. Receivers are 7075‑T6 aluminum with a Type III hard‑coat anodized finish and include an enhanced flared magwell and a rear QD sling socket. Selector markings are SAFE/SEMI, with a manual safety.
The direct impingement system is complemented by an M16‑profile, chrome‑lined bolt carrier group that is MP tested with a properly staked gas key. The DD GRIP‑N‑RIP ambidextrous charging handle provides accessible control, and a mil‑spec 6‑position receiver extension supports the collapsible stock.
Ergonomics include a glass‑filled polymer collapsible stock with QD sling sockets and overmolded surfaces, plus a Daniel Defense pistol grip with molded texture and overmolding. Unloaded weight is 5.8 lb, and overall length ranges from 27 7/8 to 31 1/4 in. The upper is marked "DDM4V7s" and "5.56," while the lower is marked "CAL. MULTI," with caliber confirmed as 5.56 NATO. Capacity is 32+1, and a Daniel Defense M‑LOK vertical foregrip is installed.