Walther PDP Compact Pro SD 9mm, 4.6 in Threaded Barrel, Gray, 18+1, Suppressor-Height Sights, Optics-Cut Slide
The Walther PDP Compact Pro SD stands out with its 4.6 inch extended, threaded barrel (1/2x28 TPI) with thread protector, suppressor-height iron sights, and an optics-cut slide with cover plate. This Pro SD configuration adds Walther's flat-faced Dynamic Performance Trigger, a flared aluminum magwell, and SuperTerrain slide serrations, all in a two-tone gray finish with black controls. Made in Germany, it includes two 18-round magazines and the original factory case, plus a ZRTS PDP V2 507K/EPS M3 optics adapter plate.
Condition
Overall Condition: Good condition, showing some signs of prior use and handling.
Bore Condition: Good - Clean, well-maintained, minor wear marks.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: Minor, superficial scratches and blemishes are present on the exterior. The rear sight shows extensive scratches and gouging.
What’s Included
- Walther factory hard case with logo and matching label
- Manual
- ZRTS PDP V2 507K/EPS M3 optics adapter plate (torque 12 in-lb)
- Magazine speed loader (polymer)
- Two 18-round steel double-stack magazines with blue followers
The Pro SD setup pairs a 4.6 inch steel barrel that is extended and threaded 1/2x28 TPI with a protective cap, aligning with the suppressor-height iron sights for clear sighting over muzzle devices. The slide is optics-cut and supplied with a cover plate, and features SuperTerrain serrations for positive manipulation.
Walther equips this model with the flat-faced Dynamic Performance Trigger, ambidextrous slide-stop levers, and a reversible push-button magazine release. A Walther-branded flared aluminum magwell speeds reloads, and the frame integrates a three-slot accessory rail for lights or other rail-mounted equipment.
The pistol carries a two-tone gray finish with black controls. The slide has a Tenifer/nitride treatment, and the polymer frame is finished in gray to match. Capacity is 18+1, and the compact profile measures approximately 8.1 inches in overall length and 1.34 inches in width.
Markings include CARL WALTHER ULM/DONAU, WALTHER ARMS FORT SMITH, AR, and MADE IN GERMANY. The barrel hood is marked "9mm x 19," and the serial number matches the factory case label. An included ZRTS PDP V2 507K/EPS M3 optics adapter plate adds mounting flexibility as supplied.