Marlin Model 1895 Trapper .45-70 Govt, Ruger-made, 16.1 in Stainless, Threaded 11/16x24, XS Lever Rail, Big-Loop Lever
This Ruger-made Marlin Model 1895 Trapper stands out as a compact, stainless .45-70 with the RM-prefix serial and Mayodan, NC barrel address. It features a 16.1 inch cold hammer-forged, threaded barrel, a factory big-loop lever, and a gray/black laminate stock. Notable upgrades include an XS Sights Lever Rail and a perforated stainless muzzle brake.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: The rear sight was removed by a previous owner and a scout rail was installed. The exterior shows a few mild scuffs and scratches.
What's Included
- Marlin Model 1895 Trapper (Ruger-made) .45-70 Govt lever-action rifle
- XS Sights Lever Rail (installed)
- Perforated stainless muzzle brake (installed)
Built in the USA under Ruger stewardship, this 1895 Trapper carries the RM-prefix serial and a Mayodan, NC barrel address. The configuration includes a right-side loading gate and ejection port, a big-loop lever for gloved use, and a 5-round magazine tube in .45-70 Govt.
The 16.1 inch stainless barrel is cold hammer-forged and threaded 11/16x24. A perforated stainless muzzle brake is installed, and twist rate is 1:20 RH. The front sight is a ramp-mounted blade with a white insert and no hood; the rear sight has been removed.
An XS Sights Lever Rail is installed, providing a solid mounting surface in the scout position. The receiver is stainless steel with a satin/matte finish that matches the barrel.
The gray/black laminate hardwood stock has cut checkering, a rubber recoil pad, sling swivel studs, a grip cap medallion, and the red/white Marlin bullseye inlay. Length of pull measures 13.5 inches, and controls include a cross-bolt safety.