SCCY CPX-1 9mm DAO Pistol, Carbon Black Nitride Slide, 3.1 in Barrel, 10+1 Capacity, Ambidextrous Safety
This SCCY Industries CPX-1 is a compact 9mm with a stainless slide treated in Carbon Black black-nitride, a 3.1 inch barrel, and an ambidextrous manual safety. It is U.S.-made in Daytona Beach, Florida and comes with three 10-round magazines, the original box, and manual. The slide is not optic-cut, and the rear sight is windage adjustable.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Overall Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: A few fine surface scratches are visible on the metal, and the finish remains strong with minimal loss.
What’s Included
- SCCY factory box with CPX1 CB (Carbon Black) label and matching-serial sticker
- SCCY CPX-1 & CPX-2 instruction manual
- Trigger lock
- 3 factory SCCY 10-round steel double-stack magazines with finger-extension baseplates
- Additional flush baseplates
The CPX-1 uses a short-recoil, double-action-only system with an internal hammer and an approximate 9.0 lb trigger pull. It has an ambidextrous manual safety, a left-side magazine release, and no magazine disconnect; the firearm will fire without a magazine inserted.
The stainless slide wears SCCY’s Carbon Black (black nitride) finish with rear cocking serrations and a non-optic-cut profile. An aluminum receiver is housed within a black polymer frame that does not include an accessory rail.
Capacity is 10+1 rounds. The barrel measures 3.1 inches with 1:16 RH rifling. Overall length is approximately 6.0 inches, with an unloaded weight around 15 oz, making for a compact, easy-to-carry footprint.
Sight configuration is a 3-dot setup with a front post and a square-notch rear that is adjustable for windage. The black textured polymer grip includes molded finger grooves for secure purchase.