Sako A7 Synthetic Stainless .270 Win M-Action Bolt Rifle, 22 in Cold Hammer-Forged Stainless Barrel, Finland
This Sako A7 Synthetic Stainless in .270 Win is a Finland-made, stainless-steel bolt-action with the M-Action configuration appropriate for this caliber. It features a 22-inch cold hammer-forged, free-floated barrel, a three-lug bolt with an efficient lift, and an adjustable single-stage trigger. The round-top receiver is drilled and tapped for Weaver-pattern bases, and a two-piece base set is included. Its detachable magazine uses an anti-accidental-release latch and is designed to be top-loadable.
Condition
Overall Condition: Good condition, showing some signs of prior use and handling.
Bore Condition: Good - Clean, well-maintained, minor wear marks.
Bore Rifling: Good Rifling - Intact, well-defined lands and grooves.
Specific Condition Notes: There are scratches and blemishes on the stock and stainless finish. The bore shows very well-defined rifling. The Soft Touch exterior on the stock has turned gummy and is tacky to the touch.
What’s Included
- Two-piece scope bases with mounting screws
- 1x 3-round detachable box magazine (polymer body, metal feed lips)
The A7 Synthetic Stainless pairs Sako’s stainless receiver and barrel with a durable synthetic stock for a weather-resistant field setup. The M-Action configuration is appropriate for .270 Win and feeds from a detachable 3-round magazine, delivering a 3+1 overall capacity.
The 22-inch barrel is cold hammer-forged and free-floated to support consistent accuracy. Twist rate is 1:10 for common .270 Win bullet weights. The stainless finish extends to the receiver for a uniform, corrosion-resistant exterior.
The action uses a three-lug bolt with approximately a 70-degree lift and a push-feed system. The detachable magazine is designed to be top-loadable and includes an anti-accidental-release (TCL) latch. The included magazine features a polymer body with metal feed lips for reliable feeding.
The stock is a glass-fiber-reinforced copolymer with a Soft Touch coating, molded texturing on the grip and fore-end, and sling-swivel studs. Length of pull is adjustable via spacers and set at 13.5 inches. The single-stage trigger is adjustable, and the rifle is supplied without sights. The round-top receiver is drilled and tapped for Weaver-pattern bases (two holes front, two rear), and a two-piece base set is included.
Proofed in Finland, this rifle carries Finnish proof marks along with the Beretta U.S.A. Corp. importer mark, confirming its origin and import path.