Remington Model 700 Long-Action Barreled Action, 24 In Carbon Steel, Magnum Bolt Face, Leupold Rings/Bases — Gunsmith Special
This Remington Model 700 barreled action is a long-action footprint with a magnum bolt face and a 24-inch carbon steel tapered barrel in a matte dark finish. The receiver is drilled and tapped and currently fitted with Leupold 1-inch rings and two-piece bases. It bears the REP oval proof and inspection stamps on the barrel shank. Only what is pictured is included, and this offering is sold AS-IS as a gunsmith special.
Condition
Overall Condition: Fair condition, showing extensive signs of prior use and handling.
Bore Overall Condition: Good - Clean, well-maintained, minor wear marks.
Bore Fouling: Mild Fouling - Light buildup of fouling or dirt.
Bore Rifling: Good Rifling - Intact, well-defined lands and grooves.
Specific Condition Details: This listing is for the barreled action only. The chamber shows features consistent with a belted magnum, the bolt face is for a magnum, and the action is long-action/magnum length. Evidence suggests a barrel setback or rechambering was performed; the barrel rollmark is mis-timed and drilled and tapped holes on the barrel index on the underside. The exact chambering cannot be confirmed and the safety of prior work cannot be verified. It is sold AS-IS, and inspection by a qualified gunsmith is recommended before any use.
What’s Included
- Leupold 1-inch scope rings and two-piece bases (installed)
The barreled action features a 24-inch carbon steel tapered barrel with an unthreaded muzzle and no iron sights, paired to a carbon steel receiver in a matching matte dark finish. The receiver is drilled and tapped, and Leupold 1-inch rings with two-piece bases are installed for an optic of your choice.
This is a long-action Model 700 with a magnum bolt face. It uses a separate recoil lug and, as configured, is single-load capable (capacity 1 round). The bolt is equipped with a recessed face, plunger ejector, and C-clip extractor.
Bore condition is noted as good with intact, well-defined rifling and only mild fouling. The barrel and receiver carry a matte dark finish suitable for field or bench use once properly configured by a gunsmith.
Markings include the REP oval proof and inspection stamps on the barrel shank, and the item was made in the USA. Only what is pictured is included. This barreled action is offered AS-IS as a gunsmith special; due to prior work indications and unknown exact chambering, a qualified gunsmith should evaluate before firing or further fitting.