Hi-Point Model 995 Classic 9mm Carbine, First-Generation, 16.5 in Unthreaded Barrel, Black Polymer Stock, 10+1
This first-generation Hi-Point Model 995 Classic is the original pre-995TS configuration, chambered in 9mm Luger with a simple, reliable blowback action. It features the early one-piece black polymer stock with integral pistol grip, a ventilated steel top shroud, and a magazine housed in the grip. Factory data lists an overall length of approximately 31.1 inches and a weight of about 6.7 lb. This carbine comes with its original box, manual, sling, OEM sights, and one factory 10-round magazine.
Condition
Overall Condition: Fair condition, showing extensive signs of prior use and handling.
Bore Condition: Good - Clean, well-maintained, minor wear marks.
Bore Rifling: Good Rifling - Intact, well-defined lands and grooves.
Specific Condition Notes: The rifle is missing the front and rear sights. There are many scratches and blemishes on exterior surfaces. Some screw heads show pitting. The bore is clean and shiny.
What’s Included
- Original box
- Manual
- Factory Hi-Point 995 steel 10-round magazine (1)
- OEM front and rear sights
- Black web sling
- Sling point
- Tool
The Model 995 Classic uses a blowback, semi-automatic action in 9mm Luger with a 10+1 capacity. The magazine is housed in the pistol grip, a hallmark of this early configuration, and the carbine ejects to the right.
The one-piece black polymer stock integrates a pistol grip and fixed butt with a 14.5-inch length of pull. Controls include a manual safety and a right-side, reciprocating charging handle with a large round knob for easy operation.
The 16.5-inch steel barrel is unthreaded and covered by a ventilated steel top shroud. The receiver includes a scope mount, and rails are present for mounting as configured.
Factory data lists an overall length of approximately 31.1 inches and a weight of about 6.7 lb. This U.S.-made carbine represents the first-generation Classic (pre-995TS) stock configuration.