HK P30LS V3 9mm Long Slide DA/SA with Installed MOD 1 - XL Multi-Port Compensator, Ambidextrous Controls, 17+1, German-Made
This German-made HK P30LS V3 is a long-slide 9mm configured with ambidextrous controls and an installed MOD 1 - XL multi-port compensator. The compensator encloses the slide nose, integrates the front sight, and adds a short underside accessory rail. A cold-hammer-forged, polygonal-rifled barrel and extractor-based loaded chamber indicator round out a feature set built for control and clarity.
It retains the V3 DA/SA system with a rear decocker and ambidextrous manual safety, plus HK's paddle-style ambidextrous magazine release and ambidextrous slide stops. The polymer frame includes an integral 3-slot MIL-STD-1913 accessory rail, and the fixed 3-dot sight picture uses a rear notch in the slide and a front post mounted on the compensator.
The compensator is the MOD 1 - XL variant, multi-port, and secures with two recessed screws. It provides an additional short bottom rail section, while keeping the front sight aligned with the slide's rear sight for a clear, consistent sight radius. The slide is marked "HK P30L" and "9 mm x 19," and the pistol bears DE proof marks on the slide, frame, and barrel.
Capacity is 17+1 and one 17-round steel double-stack magazine is included. The external spurred hammer, molded textured grip, and the extractor with a red witness mark (loaded-chamber indicator) complete a practical, well-specified P30LS V3 setup with a purpose-built compensator already installed.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent - Strong, well-defined polygonal rifling.
Specific Condition Notes: There are minor scratches and small blemishes present on exterior surfaces. The compensator shows minor carbon buildup consistent with normal firing.
What’s Included
- HK P30LS V3 9mm pistol
- 1x 17-round steel double-stack magazine
- Installed HK P30L Compensator MOD 1 - XL, multi-port (integrated front sight and underside accessory rail)
The P30LS V3 configuration delivers HK's DA/SA system with a rear decocker and ambidextrous manual safety. Ambidextrous slide stops and paddle-style magazine releases make the controls fully bilateral out of the box.
The installed MOD 1 - XL compensator encloses the slide nose, is multi-port for gas redirection, and mounts via two recessed screws. It relocates the front sight onto the compensator and adds a short underside accessory rail section for compact-mounted accessories.
The 4.45 in cold-hammer-forged barrel uses polygonal rifling, and the slide incorporates an extractor with a red witness mark that functions as a loaded-chamber indicator. Fixed 3-dot sights pair a rear notch in the slide with the compensator-mounted front post for a familiar, steady sight picture.
Built on a polymer frame with an integral 3-slot MIL-STD-1913 rail, this full-size P30LS carries DE proof marks on the slide, frame, and barrel. Markings include "HK P30L" and "9 mm x 19." The package includes one 17-round magazine.