Race City Defense RC9 Commander 9mm Double-Stack 1911, 4.25 in Ported Bull Barrel, Trijicon RMR HD
This Race City Defense RC9 Commander pairs a compact, double-stack 1911/2011-style frame with a 4.25 in ported bull barrel and a top lightening window. It is chambered in 9mm Luger with a stated 15+1 capacity and includes a Trijicon RMR HD 1.0 MOA red-dot sight. Built in the USA with Mooresville, North Carolina maker markings, it features an integral accessory rail, a flared magwell, and aggressive grip texture for confident handling.
The flat-top slide with beveled shoulders, front and rear serrations, and an RMR-footprint optics cut gives this Commander-length pistol a purposeful configuration. Safety and control highlights include extended ambidextrous thumb safeties with wide shelves, a grip safety, and a flat-faced, long-length trigger. A full-length guide rod supports the 1911-style action.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Overall Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Details: This pistol's action is very smooth, and the trigger pull is crisp. The grip serrations show very light scratches and blemishes. Due to damaged threads for the optic screws, the holes were drilled and tapped to a larger size, which resulted in the holes "busting out" on the sides of the slide. The Trijicon RMR HD optic is included with the firearm because of the repair and the low probability of swapping to a different optic. The new screws can still be removed for replacement.
Sold AS-IS.
What’s Included
- Savior Equipment soft pistol case
- Trijicon RMR HD red-dot sight, 1.0 MOA
- 1x 15-round steel double-stack magazine
The RC9 Commander uses a double-stack 1911/2011-style frame with an integral accessory rail and a flared magwell, delivering 15+1 capacity in a compact footprint. Aggressive waffle-texture grip panels aid purchase while maintaining a slim, controllable feel.
Its 4.25 in ported bull barrel features a recessed crown, with ports visible through the top slide window. The slide is a flat-top design with beveled shoulders and front and rear diagonal cocking serrations, plus an RMR-footprint optics cut.
Controls are set up for confident manipulation: extended ambidextrous thumb safeties with wide shelves, a grip safety, and a flat-faced, long-length trigger. A full-length guide rod supports the single-action-only operation.
Sighting is handled by the included Trijicon RMR HD 1.0 MOA red dot. A plain dovetailed front post is present, and there is no rear sight. Maker markings indicate Mooresville, North Carolina, USA.