Weatherby Mark V Accumark .340 Weatherby Magnum, 24 in Fluted Stainless Barrel with Muzzle Brake, U.S.-Made Nine-Lug Action
This U.S.-made Weatherby Mark V Accumark is a magnum-length, nine-lug bolt-action chambered in .340 Weatherby Magnum with a 24 in fluted stainless barrel and radial muzzle brake. It features a gray and black spider-web synthetic Monte Carlo stock, a two-tone finish with a bright stainless barrel and brake paired with a black-finished receiver and bolt shroud (stainless bolt body), and an internal 2+1 magazine. The receiver is drilled and tapped and comes with Talley/Weatherby-style one-piece ring/base mounts and 1-inch rings installed, with no iron sights.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Rifling Condition: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: This rifle shows minimal handling marks visible under close inspection, primarily on high-contact areas and the stock. Photos provide a clear view of the cosmetic condition.
What’s Included
- 1-inch scope rings (installed)
- Talley/Weatherby-style one-piece ring/base mounts (installed)
The Mark V magnum-length action uses Weatherby’s nine-lug bolt with a 54-degree lift, providing robust lockup tailored for magnum cartridges. The rifle is marked "MADE IN U.S.A." and includes a manual safety lever on the bolt shroud.
The 24 in stainless steel barrel is fluted to reduce weight and enhance cooling, and it is threaded with a radial muzzle brake installed. The stainless barrel and brake contrast with the black-finished receiver, and a black bolt shroud (with a stainless bolt body) completes the two-tone look in .340 Weatherby Magnum.
The synthetic Monte Carlo stock wears a gray and black spider-web texture for grip and visual contrast. A rubber recoil pad and sling swivel studs are factory features, and the length of pull measures 13.25 in.
The receiver is drilled and tapped and arrives with Talley/Weatherby-style one-piece ring/base mounts and 1-inch rings already installed. There are no iron sights on this rifle, keeping the top clean for the optic of your choice.
An internal magazine provides a 2+1 capacity in this chambering. The combination of the nine-lug action, threaded fluted barrel, and Weatherby’s .340 Wby. Mag. chambering defines this Accumark’s capability and configuration.