IWI Jericho II 9mm Luger Full-Size DA/SA Pistol, Polymer Frame, Matte Black, 4.4 in Barrel, 17+1, Made in Israel, 2 Magazines
The IWI Jericho II is a full-size, DA/SA 9mm built on a matte-black polymer frame with an integral MIL-STD-1913 Picatinny accessory rail. It features polygonal rifling, Novak-cut fixed 3-dot sights with a windage-adjustable rear, and front and rear slide serrations. Markings include "JERICHO II" on the left side of the frame and "9x19" on the barrel hood, with import marks from IWI US, Middletown, PA. Capacity is 17+1, with an approximate 4.4 in barrel and an unloaded weight around 26.8 oz.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Specific Condition Details: There are minor scratches and small blemishes present on exterior surfaces from prior handling. The bore is clean and shiny.
Bore Overall Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent - Well-defined polygonal rifling.
What's Included
- IWI Jericho II 9mm Luger pistol
- Two 17-round steel double-stack magazines with numbered witness holes
This Jericho II uses a short-recoil, locked-breech Browning-type lockup and a DA/SA trigger with an exposed spurred hammer. Safety features include a frame-mounted manual safety, a firing pin block, and a hammer safety intercept notch.
The polymer frame keeps weight to about 26.8 oz unloaded while retaining full-size handling. Interchangeable backstraps (S/M/L) allow the grip to be tailored to the shooter. Front and rear slide serrations aid manipulation.
Sights are Novak-cut fixed 3-dots with a windage-adjustable rear, set into dovetails front and rear. The barrel has polygonal rifling with a 1:10 twist, and the barrel hood is marked "9x19."
Additional details include an integral MIL-STD-1913 Picatinny rail for lights or lasers, matte-black slide and frame finishes, and an overall length of approximately 206–207 mm. A serial number plate is located on the underside of the dust cover/rail. Proof and import markings read "IWI US – Middletown, PA, Made in Israel."