Winchester SXP Waterfowl Hunter 12 Gauge Pump-Action, 28" Vent-Rib Barrel, 3.5" Chamber, TrueTimber Prairie Camo
This Winchester SXP Waterfowl Hunter stands out with full-coverage TrueTimber Prairie camouflage, a 28" ventilated-rib barrel, and a 3.5" chamber that accepts 2 3/4", 3", and 3 1/2" shells. It uses the Invector-Plus back-bored choke system with a threaded muzzle and features a hard-chrome plated chamber and bore. The rotating-bolt, inertia-assisted Speed Pump action and red fiber-optic front bead round out a purpose-built waterfowl configuration.
Condition
Overall Condition: Excellent condition, showing only faint signs of any prior use or handling.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Specific Condition Notes: Shows minimal evidence of prior handling. The bore is bright and clean throughout.
What's Included
- Three Invector-Plus flush-fit choke tubes: Improved Cylinder, Modified, Full
- Carlson's Invector-Plus Improved Cylinder choke tube
- Carlson's choke tube wrench
- Allen plastic choke tube case
The SXP Waterfowl Hunter configuration pairs Winchester's rotating-bolt, inertia-assisted Speed Pump action with a 12-gauge, 3.5" chamber for versatile shotshell use. Capacity is 4+1, and the cross-bolt safety is positioned at the front of the trigger guard. Length of pull measures 13.5".
The 28" barrel features a ventilated rib with longitudinal serrations and a red fiber-optic front bead for quick sight acquisition. The chamber and bore are hard-chrome plated, and the barrel is threaded for the Invector-Plus system. The back-bored (.742") Invector-Plus choke system is standard.
Full-coverage TrueTimber Prairie camouflage extends across the receiver, barrel, forend, and stock. Operating parts carry a black-chrome finish. The stock and forend are polymer, with a rubber recoil pad and a rear sling swivel stud.
Markings observed include "WINCHESTER" on the right side of the receiver and "SXP" and "PRAIRIE" on the left. The barrel is stamped "WINCHESTER Super X Pump 12 GA 2 3/4", 3" & 3 1/2" Invector-Plus 28"."