Intratec TEC-DC9 9mm Pistol, 5-inch Barrel, Perforated Shroud, 32+1 Capacity, Made in USA, with 4 Magazines and Case
This Intratec TEC-DC9 is a full-size 9mm pistol from the early 1990s, identifiable by its Miami, FL rollmark and tubular steel upper with a left-side charging handle. It features a 5-inch barrel under a perforated shroud, a simple closed-bolt, striker-fired, straight-blowback action, and a 32+1 capacity. This example includes four 32-round magazines, the Intratec factory hard case, and a thread-on barrel extension.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: The receiver and bolt show scratches from previous handling and use. Evidence of prior firing is present, and the pistol remains in very good condition overall.
What's Included
- Intratec factory hard case
- 4x 32-round steel magazines
- Thread-on barrel extension (as shown)
The TEC-DC9 variant was marketed circa 1990–1994 and is rollmarked "INTRATEC MIAMI, FL. 9MM LUGER MOD. TEC-DC9 PATENTS PENDING." This example aligns with that period, pairing a tubular steel upper receiver to a polymer lower frame with molded Intratec "IT" logos.
Its operating system is a simple straight-blowback, closed-bolt, striker-fired design. Controls include a left-side charging handle and a paddle-style magazine release. Sighting arrangement is simple, with a fixed rear notch; front configuration may vary.
The 5-inch steel barrel sits within a perforated shroud retained by a threaded muzzle collar and a protruding inner barrel tube. A rear stamped sling bracket is fitted between the upper and lower, with an additional small front loop on the shroud.
Capacity is stated at 32+1, and this pistol comes with four 32-round steel stick magazines for the TEC-DC9 pattern. The included Intratec factory hard case adds proper storage, and the thread-on barrel extension is provided as shown.
Made in the USA, this full-size 9mm offers the hallmark DC-9 configuration and period features collectors and enthusiasts recognize, presented here with desirable original-style accessories.