Beretta 950BS Jetfire .25 ACP Micro Pistol, Two-Tone, Tip-Up 2.4 in Barrel, SAO Blowback, 8+1
This Beretta 950BS Jetfire stands out as a compact, two-tone .25 ACP with the hallmark tip-up 2.4 in barrel and aluminum-alloy frame. It pairs a dark slide and barrel with a silver frame and features ornate wooden grip panels with a floral scroll pattern and an engraved PB Beretta logo. The BS variant adds a manual safety and inertia-type firing pin to the Jetfire design while keeping the pistol exceptionally light at approximately 280 g.
Condition
Overall Condition: Good condition, showing some signs of prior use and handling.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Good Rifling - Intact, well-defined lands and grooves.
Specific Condition Notes: There are markings from prior handling and use. The firearm appears to have been refinished at one point. Please refer to the photos for additional detail.
What's Included
- Beretta 950BS Jetfire .25 ACP pistol
- 1x 8-round steel single-stack magazine (marked "6.35 / Made in Italy")
The 950BS Jetfire configuration brings a manual thumb safety and an inertia-type firing pin to Beretta’s micro .25 ACP platform. It uses a simple blowback, extractorless system that ejects via gas pressure and a fixed ejector. The action is single-action only with an exposed hammer, and the magazine release is the original heel-style design.
The tip-up steel barrel is 2.4 inches long and allows direct chamber loading without racking the slide. Despite its minimal footprint, the pistol offers an 8+1 capacity in .25 ACP (6.35mm). Overall length is approximately 4.5 inches, and the unloaded weight is about 280 g, keeping it firmly in the micro category.
Construction details include a silver aluminum-alloy frame with a contrasting dark slide and barrel for a clean two-tone look. Controls and handling elements are straightforward, with rear cocking serrations on the slide and a fixed-sight arrangement consisting of an integral front blade and a fixed rear notch.
Grip panels are wood with a floral scroll pattern and the PB Beretta logo engraved in the wood, providing a classic touch to the compact profile. The included steel magazine is marked 6.35 and Made in Italy, aligning with the traditional single-stack format for this model.