Winchester Model 70 .300 WSM Bolt-Action Rifle, 24 in Barrel, Blued, Custom Muzzle Brake, Scope Bases, Two Stocks
This Winchester Model 70 in .300 WSM pairs the classic three-position safety action with useful, shooter-focused upgrades. It features a 24-inch steel barrel with a radial-ported muzzle brake, an elastomer barrel de-resonator/tuner ring, and two cross-slot scope bases already installed. A figured hardwood stock is fitted, and the original black synthetic stock is included. The G-prefix serial indicates post-1968 Model 70 production; the .300 WSM chambering places production in the early 2000s or later. The bore is bright with sharp rifling.
Condition
Overall Condition: Good condition, showing some signs of prior use and handling.
Bore Overall Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: There are markings from previous handling and use. The elastomer barrel damper/tuner ring is in rough shape and has been secured with super glue.
What’s Included
- Figured hardwood stock with black textured grip and fore-end panels; rubber buttpad (installed)
- Original black synthetic stock with integral recoil pad and molded texturing (not installed)
- Two cross-slot scope bases on receiver (Weaver/Picatinny-style; installed)
- Radial-ported muzzle brake (installed)
- Elastomer barrel de-resonator/tuner ring (installed)
The Model 70 action provides controlled, confident operation with a three-position wing safety. This example is chambered in .300 WSM and uses an internal 3+1 magazine sized for WSM cartridges. The steel receiver and barrel wear a blued/black finish, and the rifle is configured without iron sights.
The 24-inch steel barrel is fitted with a radial-ported muzzle brake and an elastomer barrel de-resonator/tuner ring. These installed components reflect the rifle’s customized setup as received.
For optics, the receiver is drilled and tapped and currently fitted with two cross-slot (Weaver/Picatinny-style) scope bases. This gives the buyer a straightforward path to mounting a compatible scope.
The installed figured hardwood stock features black textured grip and fore-end panels, sling swivel studs, a straight comb, and a rubber buttpad. Length of pull is 13.75 inches. The original black synthetic stock with integral recoil pad is also included, offering an alternate configuration. A G-prefix serial indicates post-1968 Model 70 production; combined with the .300 WSM chambering, this example dates to the early 2000s or later.