HK CC9 Micro-Compact 9mm, U.S.-Made, Optics-Ready RMSc/407K, 3.32 in Cold Hammer-Forged Barrel
This U.S.-made Heckler & Koch CC9 is a micro-compact, double-stack 9mm with a direct RMSc/407K optics footprint, a 3.32 in cold hammer-forged polygonal barrel, and ambidextrous controls. It combines a slim 0.99 in width with a steel slide, polymer grip module, and endurance validation to AC/225 and MIL-STD protocols.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Overall Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent - Polygonal rifling presents strong definition with no apparent wear.
Specific Condition Notes: There is a visible scratch on the optics cover plate. The bore shows slight discoloration consistent with light prior use.
What’s Included
- Heckler & Koch CC9 9mm pistol
- One 12-round magazine
- Factory optics cover plate with two screws (installed)
The slide is cut for a direct RMSc/407K footprint, enabling a lower-third co-witness with the standard-height iron sights. Front and rear slide serrations provide positive manipulation, and the cover plate is secured by two screws.
The 3.32 in barrel is German cold hammer-forged with polygonal rifling and a 1:9.8 RH twist. The pistol is +P rated, and its reliability and endurance were validated to AC/225 and MIL-STD protocols.
Controls are fully ambidextrous, including the slide release and an ambidextrous magazine release. A trigger safety and an extractor-based loaded chamber indicator deliver straightforward status cues. The frame is polymer with textured panels.
Dimensions remain compact for concealment: overall length is 6.03 in, width is 0.99 in, and sight radius is 5.12 in. Height measures 4.92 in with a 12-round magazine and 4.60 in with a 10-round magazine. Unloaded weight is 18.4 oz.
Markings include a shield mark on the chamber block and HK Columbus, GA, Made in USA. The slide is steel, sights are a tritium front with dot insert and a drift-adjustable square-notch rear, and an accessory rail is integrated into the frame.