Remington 870 Wingmaster LW .410 Bore Pump-Action Shotgun, 25 in Vent-Rib Barrel, 3 in Chamber, Fixed Full Choke
This Remington Model 870 Wingmaster LW is a small-frame .410 Bore variant built on the scaled "LW" receiver and fitted with a 25-inch vent-rib barrel and a fixed Full choke. It is chambered for 3-inch shells and carries the classic Wingmaster look with polished blued steel and high-gloss walnut. The receiver rollmark reads "Remington Wingmaster Model 870LW," and the barrel is marked "410 GA. FOR 3 IN. OR SHORTER PLASTIC SHELLS."
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Condition: Excellent - Clean, mirror finish, smooth bore with no signs of wear.
Specific Condition Notes: There are minimal handling marks from prior use. The bore is clear and reflective throughout. Please refer to the photos for close-up views.
What's Included
- Remington Model 870 Wingmaster LW .410 pump-action shotgun (25 in barrel, fixed Full choke, 3 in chamber)
The LW designation identifies a true small-frame receiver scaled for .410 and 28 gauge, and this example bears the "H" serial suffix denoting the .410 small-frame configuration. Capacity is 2+1.
The 25-inch vent-rib barrel is factory marked "410 GA. FOR 3 IN. OR SHORTER PLASTIC SHELLS" and is cut with a fixed Full choke. A single front bead provides a clean, familiar sight picture. The 3 in chamber is correctly noted and supports 3 in (and shorter) .410 plastic shells.
Metalwork is finished in the classic Wingmaster blued polish, paired with high-gloss walnut furniture. The stock features a pistol grip, pressed fleur-de-lis checkering, white-line spacers, a grip cap with bird medallion, and a black Remington buttplate.
The length of pull measures 14 inches. The receiver is steel and blued, and the fore-end is walnut to match the stock. Overall, it presents as a clean, well-cared-for Wingmaster LW with the desirable .410 configuration, 3 in chamber, and Full choke.