Remington Model Seven 7mm-08 Rem Bolt-Action Rifle, 18.5 in Blued Carbon Steel, Walnut Stock, 4+1, Scope Base with 1-Inch Rings, Leather Sling
This Remington Model Seven stands out as a compact, American-made bolt-action chambered in 7mm-08 Rem. It features an 18.5-inch sporter-contour carbon steel barrel and a receiver with significant bluing loss (largely bright/silver with traces of blue at the ring and tang), paired with a gloss-finished walnut stock. The receiver is roll-marked Model Seven and is drilled and tapped with a scope base and vertically split 1-inch rings installed. A leather sling is attached. The barrel carries the Remington Ilion address and 7MM-08 markings with an oval REP proof at the shank.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Overall Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: There are minor, superficial scratches and small blemishes visible on the exterior surfaces.
What’s Included
- Leather sling (installed)
- Scope base with vertically split rings (installed)
The Model Seven configuration here is tailored for handiness with an 18.5-inch sporter-contour barrel and an internal 4+1 magazine. It is chambered in 7mm-08 Rem., with the caliber and Remington Ilion address roll-marked on the barrel. The blued carbon steel barrel presents a classic, durable finish, while the receiver shows notable bluing wear.
The receiver is drilled and tapped and fitted with a scope base and vertically split 1-inch rings, ready to accept a 1-inch scope. There are no iron sights, and there are two small threaded holes near the muzzle. This setup emphasizes a clean sighting arrangement focused on optic use.
The walnut stock wears a gloss finish with cut checkering for grip, an inset oval medallion, and sling swivel studs. A Remington-branded brown buttplate with a black spacer caps the stock, and the length of pull measures 13.25 inches. A leather sling is attached for carry.
Factory and inspection details include a Remington Model Seven roll-marked receiver and an oval REP proof at the barrel shank. The rifle is made in the United States and retains the classic walnut-and-steel aesthetic associated with Remington sporting rifles.