CZ 75 SP-01 Tactical 9mm Luger, Steel Frame, DA/SA Decocker, Black Polycoat, 4.6 in CHF Barrel, Meprolight Rear/FO Front, 18+1
This full-size CZ 75 SP-01 Tactical stands out as a Czech-made, steel-frame DA/SA pistol with the slide-in-frame design, a cold hammer-forged 4.6 inch barrel, and a black polycoat finish. It is thoughtfully set up with a Meprolight Tru-Dot rear sight and a green fiber-optic front, plus Cajun Gun Works aluminum grips and CGW spring upgrades. Proofed in 2016 with matching serials on slide and frame, it includes the factory case, manual, two 18-round magazines, and the original 25 m test target dated 25 Oct 2016.
Made in the Czech Republic, this SP-01 Tactical features the decocker configuration, a full-length dust cover with an integral 3-slot accessory rail, and a lanyard loop. Czech CIP proofs, importer mark from CZ-USA Kansas City, and factory documentation add clear provenance.
Condition
Overall Condition: Excellent condition, showing only faint signs of any prior use or handling.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: There are only minimal signs of prior use. The bore is clean and shiny.
What’s Included
- CZ factory hard case with model/serial label
- CZ instruction manual
- CZ factory Hit Pattern Data Chart test target dated 25.10.2016
- Two 18-round steel magazines with polymer baseplates (CZ 75/SP-01 pattern)
- CZ-logo aluminum grip panels (installed)
- Meprolight Tru-Dot rear sight and green fiber-optic front sight (installed)
The SP-01 Tactical variant pairs a DA/SA action with a decocker, delivering the model’s proven ergonomics in a duty-ready format. Its slide-in-frame layout and full-length dust cover contribute to the characteristic CZ balance, while the integral 3-slot accessory rail is built into the dust cover.
The 4.6 inch cold hammer-forged barrel and steel frame provide durability and consistency. Capacity is 18+1, and this pistol comes with two 18-round steel magazines with polymer baseplates. The ring-style hammer and internal slide rails reflect hallmark CZ 75 engineering.
Upgrades include Cajun Gun Works aluminum grips with CZ logo, plus CGW recoil spring, extended firing pin spring, and trigger spring installed. Sighting is clear and fast with a Meprolight Tru-Dot rear and a green fiber-optic front blade, both fixed.
Manufactured in the Czech Republic, the pistol wears a black polycoat finish on both frame and slide. It bears Czech CIP "N" proofs with a 2016 year code, an importer mark from CZ-USA in Kansas City, and matching serial numbers on the slide and frame. A factory 25 m, 5-shot test target dated 25 Oct 2016 is included for documentation.