FMK 9C1 G2 Recon 9mm Compact, Fast Action 804, 4" Stainless Barrel, Tan, 10+1, Made in USA
The FMK 9C1 G2 Recon is a compact, striker-fired 9mm built in the USA with a 4-inch stainless steel barrel, tan slide and frame, and the Fast Action 804 trigger. It features fixed Glock 19-pattern sights, an accessory rail, and a prominent loaded chamber indicator marked "LOADED WHEN UP." Distinct touches include the Recon-marked frame and a slide backplate engraved "FREEDOM" and "LIBERTY."
Condition
Overall Condition: Good condition, showing some signs of prior use and handling.
Bore Overall Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: There are visible handling marks from prior use. The top of the slide shows scuffs through the tan Cerakote finish. The bore is bright and clean. Please refer to the photos for a close look at the noted areas.
What's Included
- FMK factory hard case
- FMK 9C1 Series instruction manual
- Cable gun lock
- 1x 10-round steel 9mm magazine with witness marks
This 9C1 G2 Recon combines a compact footprint with a 4-inch stainless barrel and a 10+1 capacity, providing a straightforward carry and range-ready setup. The frame is marked "Recon" and includes molded finger grooves on the front strap plus a rubberized, interchangeable backstrap to tailor the grip.
The Fast Action 804 trigger and striker-fired, tilting-barrel locked-breech operation deliver a consistent, familiar manual of arms. Safety features include a trigger safety, a firing pin block, and a rear-protruding loaded chamber indicator with a clear "LOADED WHEN UP" legend.
Sighting is simple and durable with fixed Glock 19-pattern sights: a white-dot front and a white-outlined U-notch rear. The slide backplate is uniquely engraved with "FREEDOM" and "LIBERTY," and the top of the slide is marked "9x19 USA," with the barrel hood stamped "9x19."
The tan-finished slide and polymer frame are complemented by a one-slot accessory rail on the dustcover for a light or similar rail-mounted tool. Additional markings include "MADE IN USA," a patent number on the right side of the frame (PAT. # 8028454), and a serial plate embedded under the dustcover.