Carl Gustav m/94 Carbine Interarmco G 33/50 Sporterized Mauser in 6.5x55 Swedish, 17.5 in In-the-White Barrel, Blued Receiver, Drilled and Tapped, Jeweled Bolt
This Carl Gustafs Stads Gevärsfaktori m/94 Carbine is a Swedish small-ring Mauser that has been professionally sporterized and marked INTERARMCO G 33/50 on the receiver ring. It features a compact 17.5 in sporter-contour barrel with a recessed crown, a jeweled bolt body with a turned-down handle, and a hardwood Monte Carlo stock with a right-hand cheekpiece. The receiver and barrel are drilled and tapped, and a steel side-mount scope base with rings is included detached. Swedish crown inspection marks and the Interarmco import marking are present.
Condition
Overall Condition: Good condition, showing some signs of prior use and handling.
Bore Overall Condition: Good - Clean, well-maintained, minor wear marks.
Bore Rifling: Good Rifling - Intact, well-defined lands and grooves.
Specific Condition Notes: This rifle has been sporterized and now resembles a youth-size configuration with a 12.0 in length of pull. The receiver and barrel are drilled and tapped for scope mounting. The receiver's blued finish shows minor pitting and finish wear, with small scratches and blemishes present. The bore is clean and shiny.
What’s Included
- Steel side-mount scope base with two rings (detached)
Built on the proven Swedish small-ring Mauser platform, this m/94 carbine retains the long external extractor and controlled-feed bolt design. The bolt body is polished in the white with engine-turned jeweling, and the handle is turned down with a round knob for easier operation in a scoped configuration.
The barrel is a 17.5 in sporter contour with a recessed crown for protected rifling. It is chambered in 6.5x55 Swedish, a cartridge well-known for smooth shooting characteristics. The barrel exterior is in-the-white (bright steel), and the muzzle is not threaded.
The hardwood sporter stock is configured with a Monte Carlo comb and a right-hand cheekpiece for a stable cheek weld, paired with a ventilated rubber recoil pad. A standard protruding swivel stud is installed at the fore-end, and the buttstock has a flush, inletted detachable/QD-style sling swivel base. The length of pull measures 12.0 in.
The receiver and barrel are drilled and tapped for mounts, and the rifle comes with a steel side-mount scope base and two rings supplied loose for the buyer to install. Factory sights have been removed; there are no front or rear sights installed.
Markings include Swedish crown inspection stamps and the INTERARMCO G 33/50 import designation on the receiver ring. The rifle uses an internal 5-round magazine and features a blued receiver finish with the barrel exterior left in-the-white (bright steel).