Marlin 1895 Trapper .45-70 Govt Lever-Action, Ruger-Made, 16.1 in Threaded Stainless, Skinner Sights, 5+1
This Ruger-made Marlin 1895 Trapper stands out with a Mayodan, NC barrel address and RM serial prefix, a compact 16.1 in stainless barrel, and a factory-threaded 11/16x24 muzzle. It features Skinner sights with a receiver-mounted aperture marked TRAPPER, a large-loop lever, and a grey/black laminate stock with crisp checkering. Capacity is 5+1 in .45-70 Govt.
Condition
Overall Condition: Good condition, showing some signs of prior use and handling.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: There are markings from previous handling and use. Areas of surface rust are present. The bore is bright and clean. Refer to pictures.
What's Included
- Lace-on leather buttstock shell carrier with cartridge loops, installed
The 1895 Trapper configuration pairs a 16.1 in stainless barrel with a satin stainless receiver for a durable, compact lever gun in .45-70 Govt. The barrel is factory threaded 11/16x24, adding versatility for compatible muzzle devices. The magazine tube runs nearly to the muzzle and incorporates a front sling swivel stud.
This example is from Ruger-made Marlin production, identifiable by the Mayodan, North Carolina barrel address and the RM serial prefix. It retains the classic right-side loading gate and ejection port and uses a large-loop lever for confident operation.
Skinner sights are fitted from the factory: a receiver-mounted aperture marked TRAPPER at the rear and a ramped front blade. This sighting system is straightforward and rugged, matched to the Trapper’s compact barrel length.
The stock set is grey/black laminate hardwood with diamond-in-panel checkering on the grip and forend. Length of pull measures 14.0 in. A cross-bolt safety is present, and overall construction and assembly are made in the USA.