Zastava ZPAPM70 7.62x39 Semi-Auto Rifle, 16.3 in CHF Chrome-Lined Threaded Barrel, Adjustable Polymer Stock, Serbian-Made
This Zastava ZPAPM70 stands out with its Serbian manufacture, robust 1.5 mm stamped receiver, and RPK-style bulged front trunnion. It features a 16.3-inch cold-hammer-forged, chrome-lined, threaded barrel with an M14x1 LH pattern, plus adjustable polymer furniture and Hogue-marked handguards. The rifle is in very good overall condition with an excellent bore and comes with two 30-round magazines.
The build includes a smooth stamped top cover, AK-pattern graduated rear sight leaf, and an adjustable post front sight with protective ears. The safety lever incorporates a bolt-hold-open notch, and the receiver carries clear model and importer markings. A cleaning rod is installed under the barrel.
The 7.62x39 chambering pairs with a long-stroke gas piston and rotating bolt action for proven AK-pattern operation. The barrel is threaded M14x1 LH, allowing the use of compatible muzzle devices. Stated capacity is 30+1.
Furniture includes a Hogue-marked polymer lower handguard with a matching polymer upper handguard, and an adjustable/collapsible polymer stock with a cheek-riser, sling slots, and a ventilated rubber buttpad. Length of pull is listed at 14.5 inches.
Markings include "MDL: ZPAPM70 CAL 7.62X39MM." on the receiver and "ZASTAVA ARMS USA DES PLAINES, IL" as the importer mark. Selector legends read "SAFE" and "FIRE."
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: There are minimal markings from previous handling and use. Please refer to the photos for a closer look at the surfaces and finish.
What’s Included
- Zastava Arms ZPAPM70 7.62x39 semi-automatic rifle
- Cleaning rod installed under the barrel
- One Magpul PMAG MOE AK/AKM 7.62x39 30-round polymer magazine
- One 30-round AK-pattern magazine sealed in a bag labeled "SC30 AK47 Magazine"
The ZPAPM70’s 1.5 mm stamped receiver and RPK-style bulged trunnion provide a reinforced AK-pattern foundation. The smooth stamped top cover and AK tangent rear sight leaf reflect the classic M70 lineage.
The 16.3-inch barrel is cold-hammer-forged, chrome-lined, and threaded M14x1 LH. A front sight block with protective ears and detent is installed, and the cleaning rod is fitted beneath the barrel.
The rifle uses a semi-automatic, long-stroke gas piston system with a rotating bolt. The safety lever includes a bolt-hold-open notch, and selector legends are marked "SAFE" and "FIRE."
Polymer furniture includes a Hogue-marked lower handguard with a matching upper handguard, plus an adjustable/collapsible buttstock featuring a cheek-riser, sling slots, and a ventilated rubber buttpad. Length of pull is 14.5 inches.
It is chambered in 7.62x39 with a stated capacity of 30+1 and ships with two 30-round magazines: one Magpul PMAG MOE and one AK-pattern magazine sealed in factory-style packaging.