Franchi SPAS-12 12 Gauge, Dual-Mode Pump/Semiauto, 21.5 in Barrel, 8+1, Folding Stock — Italian-Made, Inoperable Restoration Candidate
This Italian-made Franchi SPAS-12 is a collectible dual-mode shotgun configured with the classic folding metal stock and rotating butt hook, a 21.5-inch barrel with an external screw-on choke, and an aftermarket B-Square receiver saddle/optic mount. It features Brescia factory markings and an AA-prefix serial. This example is currently inoperable and will require parts and professional restorative work, making it a strong candidate for a dedicated restoration project or a valuable source of SPAS-12 parts.
Condition
Overall Condition: Poor condition.
Bore Overall Condition: Good - Clean, well-maintained, minor wear marks.
Specific Condition Notes: The shotgun is inoperable. The firing pin is not properly retained in the bolt. The action is partially seized and does not fully cycle. Gunsmithing and restorative work, including parts replacement or refresh, will be required to return this shotgun to operating condition. There are widespread scratches, blemishing, rust, and pitting.
The folding metal stock shows rust and does not fold into its third position. No rear sight is present.
What’s Included
- Franchi SPAS-12 12-gauge shotgun (as described)
- Aftermarket B-Square receiver saddle/optic mount (installed)
The SPAS-12 is known for its dual-mode operation, allowing the user to select gas-operated semiautomatic or manual pump action. This example is designed for 2.75-inch (70 mm) shells only and uses an extended tubular magazine with a stated 8+1 capacity.
It has a 21.5-inch steel barrel with an external screw-on choke. The receiver is steel, and factory markings read: "S.P.A.S. 12 – L. FRANCHI S.p.A. – BRESCIA MADE IN ITALY." A fixed, tall triangular front sight is present; no rear sight is included.
The folding metal stock is skeletonized and includes the rotating butt hook, with a 13.5-inch length of pull. The shotgun is fitted with a black polymer pistol grip and a ventilated tan polymer top handguard/heat shield. A sling loop is located under the rear receiver/stock knuckle.
An aftermarket B-Square receiver saddle/optic mount is installed for those who plan to configure the gun after restoration. With its Italian origin, AA-prefix serial, and distinctive SPAS-12 configuration, this inoperable example will require parts replaced/refreshed and professional gunsmithing to return to service. It is well-suited for enthusiasts seeking to restore a rare vintage shotgun or for those in need of SPAS-12 parts.