Winchester Model 101 12 Gauge Over/Under, 26 in Vent Rib, Fixed M & F Chokes, Factory Engraved (Japan)
This Japan-made Winchester Model 101 stands out with factory scroll engraving on a bright alloy receiver, 26-inch Winchester Proof Steel barrels, and classic fixed chokes in Modified (lower) and Full (upper). It features 2 3/4 inch chambers, a single trigger with tang safety, jeweled breech surfaces, and a ventilated rib with a brass bead. Neutral grip and neutral cast, matching assembly numbers, and clear Japanese proof and inspector markings round out a well-detailed example.
Condition
Overall Condition: Good condition, showing some signs of prior use and handling.
Bore Overall Condition: Good - Clean, well-maintained, minor wear marks.
Specific Condition Notes: Scuffs, dings, and wear are present throughout. The top lever rests at the 6 o'clock position, indicating the locking lug will need replacement soon. The ejectors are timed. The firing pins show slight pitting and flattening. Barrel fit is good.
What’s Included
- Winchester Model 101 12 Gauge over/under shotgun
The shotgun is configured with 26-inch Winchester Proof Steel barrels, a ventilated rib, and a brass bead front sight. Chambers are 2 3/4 inch, and the fixed chokes are Modified in the lower barrel and Full in the upper barrel. Capacity is two rounds.
It uses a break-action over/under layout with a single trigger and tang safety. The breech/monoblock surfaces are jeweled, and the ejectors are properly timed, supporting consistent operation.
The receiver has a bright alloy finish with factory scroll engraving on the flanks, bottom, top lever, and trigger guard. The barrels are blued. Markings include MADE IN JAPAN, WINCHESTER PROOF STEEL, and a circled OK inspector stamp. The barrel legend reads: "MODEL 101 – WINCHESTER – 12 GAUGE – 2 3/4 – MADE IN JAPAN." Matching assembly numbers are present on the forend iron and barrel lug.
The stock set is checkered wood with a glossy finish and pistol grip, paired with a long beavertail forend. A ventilated recoil pad with a white-line spacer is installed. The stock is built with a neutral grip and neutral cast, and the length of pull measures 14.0 inches.