Intratec AB-10 9mm Luger Semi-Auto Pistol, 5-inch Barrel, Threaded Muzzle, Ventilated Shroud
This Intratec AB-10 is a Miami-made, semi-automatic 9mm pistol from the late 1990s–2001 era. It features the distinctive tubular steel upper with a ventilated barrel shroud, an externally threaded muzzle, and a top-mounted charging knob. Receiver markings read "INTRATEC MIAMI, FLA — 9MM LUGER — MOD. AB-10" with molded ITC logos and a manual warning. No magazine is provided.
Condition
Overall Condition: Fair condition, showing extensive signs of prior use and handling.
Bore Overall Condition: Poor - Noticeable dirt, stains, significant corrosion or damage.
Bore Fouling: Severe Fouling - Extensive corrosion, pitting, or erosion.
Bore Rifling: Poor Rifling - Rifling heavily worn or filled with fouling or debris.
Specific Condition Notes: There is extensive rust and pitting visible on multiple exterior surfaces, along with scratches and blemishes. The bore shows severe corrosion and buildup that appear to constrict it; the barrel will need replacement. No magazine is provided.
What’s Included
- Intratec AB-10 9mm Luger semi-automatic pistol
- No magazine included
The AB-10 is Intratec’s post-1994 "After-Ban" variant, with production concluding by the company’s closure in 2001. This example is clearly marked on the receiver and grip-frame, showing the factory legends, ITC logos, and the molded manual warning appropriate to the period.
Its construction pairs a tubular steel upper with a polymer grip-frame that has molded checkering. The upper incorporates a ventilated barrel shroud and an externally threaded muzzle, along with two stamped-wire sling/retention loops.
Controls and handling features include a top-mounted round charging knob with a right-side oval ejection port. The pistol uses simple iron sights.
Mechanically, the AB-10 operates as a semi-automatic pistol using simple blowback, closed-bolt operation. The barrel is 5 inches in length, and capacity is listed as 1 round. No magazine is provided.