Sig Sauer P250 Compact 9mm, DAO Hammer-Fired, 4.5 in Extended Barrel with Two-Port Compensator, Modular FCU, 15+1, Two 15-Round Magazines
This Sig Sauer P250 Compact stands out as a modular, DAO hammer-fired 9mm with performance-focused upgrades. It features a 4.5 inch extended barrel paired with an aftermarket two-port compensator and a tungsten guide rod. The pistol is a discontinued, U.S.-marked Exeter, NH model and comes with two 15-round Italy-made steel magazines, one fitted with an aluminum extended base pad.
Condition
Overall Condition: Fair condition, showing extensive signs of prior use and handling.
Bore Condition: Good - Clean, well-maintained, minor wear marks.
Bore Rifling: Good Rifling - Intact, well-defined lands and grooves.
Specific Condition Notes: Minor scratches and blemishes are present on exterior surfaces. The bore is clean and shiny. The compensator is secured to the barrel with red Loctite and will be very difficult to remove; removal may require a gunsmith.
What’s Included
- Sig Sauer P250 Compact 9mm pistol
- Two 15-round steel magazines (Italy-made); one includes an aluminum extended base pad
- Installed extended 9mm barrel (4.5 inch)
- Installed two-port rectangular compensator/muzzle brake (brand not marked)
- Tungsten guide rod
The P250’s modular, serialized FCU design allows the fire control unit to be the serialized component, with this example configured as a compact 9mm. It is a discontinued model, U.S.-marked from Exeter, New Hampshire, and offers a 15+1 capacity in a compact profile.
This pistol is set up with an extended 4.5 inch 9mm barrel and an aftermarket two-port compensator. The compensator’s rectangular, two-port layout is installed on the extended barrel, and a tungsten guide rod adds forward weight to the assembly.
It uses a double-action only, hammer-fired system with a bobbed external hammer and no manual safety or decocker. Controls and handling are straightforward, with rear cocking serrations on the slide and a polymer grip module featuring molded 'SIG SAUER' panels.
Fixed 3-dot sights are installed, with a front blade (single dot) and a rear notch (two dots). A multi-slot accessory rail with five slots is integrated into the dust cover for mounting compatible accessories.