HK VP9 A1 K Optics Ready 9mm, 4.09 in Barrel, Holosun SCS VP9-GR Installed, 3x 15-Round Mags, German-Made
This German-made HK VP9 A1 K Optics Ready stands out with its direct-mount slide cut hosting a Holosun SCS VP9-GR green-reticle optic, factory ambidextrous controls, and a customized flat-faced trigger with an integral safety blade. It includes three 15-round steel magazines and comes with the original HK box labeled VP9K OR, manuals, and accessories, with matching serials on the slide, barrel, and frame.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Polygonal rifling with strong, well-defined profiles.
Specific Condition Notes: The pistol presents minimal handling marks. The bore is bright with a mirror finish. Matching serials are present on the slide, barrel, and frame.
What’s Included
- Holosun SCS VP9-GR optic (installed)
- HK factory box with VP9K OR end label
- Soft zippered case
- Operator's Manual VP9A1 Series
- HK-branded clear mat
- Three 15-round steel magazines (one with an aftermarket base plate)
- Interchangeable backstraps
- Interchangeable side panels
- Flat face trigger & trigger spring kit from McCarbo (installed)
- HK VP9/VP9K/VP40 Trigger Spring Kit (OEM)
- Slide plate
- Optic plate cover
- Holosun SCS VP9-GR box
- Gun lock
The slide is marked HK VP9K, while the box end label denotes VP9K OR (A1 Optics Ready). This VP9 is a compact-size, striker-fired 9mm with a 4.09 in cold hammer-forged barrel and polygonal rifling. It is German-made with CIP proof marks and carries the HKI Columbus, GA import mark.
The slide features front and rear cocking serrations. A direct optic cut accepts the installed Holosun SCS VP9-GR, while the pistol retains iron sights with a front dot and rear notch.
The barrel is steel with a locked-breech, recoil-operated system. A customized flat-faced trigger with an integral safety blade is installed, along with a McCarbo trigger spring kit; the OEM HK trigger spring kit is included in the package.
The polymer frame uses interchangeable backstraps and side panels for fit tuning. Fully ambidextrous controls include slide releases and a paddle-style magazine release. A molded Picatinny/MIL-STD-1913 rail on the dust cover supports light or accessory mounting. Capacity is 15+1, and three steel magazines are included, one wearing an aftermarket base plate.