Tisas PX-9 Carry Comp 9mm Luger, Compact, RMSc/Holosun-K Footprint Optics Cut, 3.5 in Match Barrel, 15+1, Black
This PX-9 Carry Comp stands out with a compact 3.5 in match-grade barrel, an optics-cut slide with RMSc/Holosun-K footprint and installed cover plate, and a durable black QPQ/Tenifer-type slide finish. It ships with two 15-round steel magazines and modular grip panels/backstraps, and features ambidextrous slide-stop levers, a flat-faced trigger with integral safety blade, and a three-slot accessory rail.
Condition
Overall Condition: Excellent condition, showing only faint signs of any prior use or handling.
Bore Overall Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: This pistol shows little evidence of prior use. The bore is clean and shiny with a mirror-like appearance.
What’s Included
- Tisas hard case with PX-9 Carry COMP label (serial-matched)
- Owner's manual
- Cleaning tools
- Tisas-branded magazine loader (polymer)
- Tisas-branded polymer holster
- Interchangeable grip side panels and backstraps (loose)
- 2x 15-round steel double-stack 9mm magazines
The Carry Comp submodel pairs compact dimensions (approx. 6.7 in overall length, 5.25 in height) with a 15+1 capacity and an approximate weight of 25 oz. The striker-fired system uses a flat-faced trigger with an integral safety blade and a trigger safety. Controls include ambidextrous slide-stop levers and a left-side magazine release.
The slide is factory optics-cut for the RMSc/Holosun-K micro footprint and arrives with a cover plate installed. Sights are dovetailed, with a white dot front blade and a blacked-out square-notch rear. A three-slot accessory rail on the frame supports common weapon lights or accessories.
The slide wears a black QPQ/Tenifer-type finish, while the polymer frame is finished in black. The barrel is match-grade and non-threaded. Interchangeable grip side panels and backstraps allow tailoring the grip shape.
Additional details include compatibility with SIG P228/P229-pattern magazines and nickel-coated internals noted for the compensated lineup. Markings include TISAS Knoxville, TN and TISAS Made in TURKEY. A matching serial was observed on the frame insert and the case label.