Smith & Wesson M&P9 M2.0 5-inch Optics-Ready Long Slide, LE Program (13618), 9mm, Tall Steel Sights, 2x 17-Round Mags
This full-size M&P9 M2.0 stands out as the long-slide, 5-inch, optics-ready Law Enforcement Program configuration (mfg part number 13618). It combines a stainless steel slide and barrel with the Armornite finish, tall steel sights with a tritium front, and ambidextrous/reversible controls. It comes with two 17-round magazines, a factory hard case, the factory optics screw and plate kit, and three spare M2.0 palmswell backstraps. Removable grip tape is installed on the frame.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Overall Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: The exterior shows a few small, superficial handling marks. The slide's optics cut is open and the factory cover plate is not present.
What’s Included
- Smith & Wesson factory hard case (M&P-branded)
- 2x 17-round factory S&W M&P9 steel double-stack magazines
- Factory S&W M&P M2.0 optics-ready screw and plate kit
- S&W M&P M2.0 interchangeable palmswell backstraps (three spares)
The long-slide 5-inch barrel configuration provides an increased sight radius and pairs with tall steel sights. The front sight is tritium (TG-H3 marked), and the rear is a robust steel sight; specific rear sight configuration may vary. The stainless steel slide and barrel receive S&W's Armornite treatment, and the M2.0 extended steel chassis reinforces the polymer frame.
This is the Law Enforcement Program style 13618 (LE OR FT) configuration. It features ambidextrous slide stop levers and a reversible magazine release, along with a three-slot accessory rail on the dustcover. Capacity is 17+1, and two factory magazines are included.
The optics-ready slide is cut with a multi-hole pattern for mounting plates, and the cover plate is not installed. A factory S&W M&P M2.0 screw and plate kit is included to support optic interface needs.
Controls are striker-fired with a hinged two-piece trigger and an integrated trigger safety. No external manual thumb safety is present. The frame carries the M2.0 aggressive grip texture, interchangeable palmswell backstraps, and removable grip tape on the frame for added traction if desired.