Remington Model 1100 Magnum 12 Gauge, 30 inch Vent Rib, Fixed Full Choke, 3 inch Chamber, Factory Scroll Engraved
This Remington Model 1100 Magnum is a USA-made, gas-operated 12 gauge built on the 3 inch Magnum frame. It features a 30 inch steel vent-rib barrel with a fixed Full choke and a factory scroll-engraved blued receiver. The right side is marked "MAGNUM," the left shows "Remington Model-1100" with decorative scroll, and the barrel is marked "12 GA MAGNUM FOR 3 IN. SHELLS" and "FULL." The serial suffix "M" denotes the 12 gauge Magnum 3 inch frame per Remington Society references.
Condition
Overall Condition: Good condition, showing some signs of prior use and handling.
Bore Overall Condition: Good - Clean, well-maintained, minor wear marks.
Specific Condition Notes: The firearm presents in sound condition with visible scratching and blemishes on exterior surfaces. The bore is clean.
What's Included
- Remington Model 1100 Magnum 12 Gauge semi-automatic shotgun
The 30 inch steel barrel with ventilated rib and fixed Full choke provides a classic Magnum 1100 configuration. A front bead sight and knurled rounded magazine cap complete the barrel assembly. Barrel markings read "12 GA MAGNUM FOR 3 IN. SHELLS" and "FULL."
The blued steel receiver carries factory decorative scroll engraving on both panels. The left side is marked "Remington Model-1100" with scroll, and the right side is marked "MAGNUM," identifying its magnum configuration.
This example is a true 12 gauge Magnum build, with a 3 inch chamber and a capacity of 4+1. The serial suffix "M" further denotes the 12 gauge Magnum 3 inch frame as referenced by the Remington Society.
The gas-operated, semi-automatic action uses a cross-bolt safety. Furniture includes a checkered wood pistol-grip stock with a grip cap featuring a white diamond inlay, a white-line spacer, a ventilated recoil pad, and a matching wood fore-end. Length of pull measures 13.75 inches.