Beretta 682 X Trap 12 Gauge Two-Barrel Combo — 32 in Unsingle & 30 in O/U Optima-Bore, RH Stock, Adjustable Comb
This Italian-made P. Beretta 682 X Trap stands out as a 30 in & 32 in two-barrel set tailored for trap. It pairs a 32-inch X Trap unsingle with a tall stepped rib and a 30-inch Optima-Bore over/under set, all in Excelsior High Strength Alloyed Steel. Right-hand ergonomics, an adjustable-comb Monte Carlo stock with a Kick-EEZ pad, and a green fiber-optic front sight complete a purposeful competition-focused configuration. Barrels carry Italian proofs and MADE IN ITALY markings; barrel serials are non-matching to the receiver.
Condition
Overall Condition: Good condition, showing some signs of prior use and handling.
Bore Condition: Good - Clean, well-maintained, minor wear marks.
Specific Condition Notes: Surfaces show scuffs, dings, and wear from prior use. Barrel fit is good on both sets. The locking lug will need to be addressed soon. The gun is currently set up to extract only with no ejection. Firing pins are in good condition.
What’s Included
- Beretta-branded hard case
- 30 in over/under Optima-Bore barrel set with two installed flush Beretta Optima (non-HP) choke tubes
- Extended ported choke tubes marked Benelli (numbered 30 and 25) plus one additional extended ported tube (for the 32 in unsingle barrel)
- Adjustment tool(s) as pictured
The two-barrel combo provides flexibility for trap disciplines. The 32-inch X Trap unsingle has a 2 3/4-inch chamber, a tall stepped ventilated rib with oval lightening windows, and porting to manage muzzle rise. The companion 30-inch over/under Optima-Bore set features 3-inch chambers and ventilated ribs. Both barrels are threaded for screw-in chokes: the 32-inch unsingle uses the Beretta/Benelli MobilChoke pattern, while the 30-inch Optima-Bore O/U set uses Beretta Optima tubes. Both are marked Excelsior High Strength Alloyed Steel.
Bore dimensions are listed as 18.3 mm for the unsingle and 18.6 mm for the over/under set. Factory barrel weight stamps read KG1.880 (unsingle) and KG1.370 (O/U), providing helpful reference for balance and swing characteristics. Capacity is 2 rounds.
The walnut stock is configured for right-hand shooters with a right-hand palm swell and right-hand cast-off. It uses a Monte Carlo profile with an adjustable comb for fine-tuning point of impact. A beavertail forend offers a solid forward grip, and a Kick-EEZ recoil pad complements the 14-inch length of pull. The buttstock carries a large Beretta roundel inlay.
Controls include a single trigger, a top-tang safety, and a barrel selector. The ventilated rib carries a green fiber-optic front sight that presents a bright, easily tracked aiming reference. Markings include Italian proof marks and MADE IN ITALY.
The included extended, ported Benelli-marked tubes are installed on and compatible with the 32-inch unsingle barrel. Markings observed on these tubes include medium (M), improved modified (IM), and long full (LF), with additional extended choke markings noted for IM and M, alongside the included numbered tubes (30 and 25). The 30-inch Optima-Bore O/U barrels take Beretta Optima tubes and include two installed flush Optima (non-HP) tubes; they are not cross-compatible with the Benelli/MobilChoke tubes. Barrel serials do not match the receiver, as noted.