Walther PD380 .380 ACP Compact DA/SA Pistol, 3.7 in Barrel, Black, 8+1, Germany, Excellent Condition
The Walther PD380 is a compact, DA/SA, hammer-fired .380 ACP pistol made in Germany with CIP nitro proofs and a DE24 (2024) date code. This example stands out for its excellent overall condition, matching serial numbers on the slide, barrel, and frame, and practical features such as an ambidextrous paddle magazine release, ambidextrous slide-mounted safety levers, and an integral MIL-STD-1913 style accessory rail with three slots.
It uses a short-recoil locked-breech system with an external, serrated-spur hammer and an internal slide catch that holds the slide open on empty without an external slide stop lever. The 3-dot sights include a windage- and elevation-adjustable rear and are Glock-pattern compatible. Front and rear slide serrations, a loaded-chamber viewport, and Walther’s Performance Duty grip texture round out a feature set oriented toward confident handling.
Condition
Overall Condition: Excellent condition, showing only faint signs of any prior use or handling.
Bore Overall Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: Minimal evidence of prior handling is present. The bore shows a bright, mirrorlike appearance.
What’s Included
- Walther factory hard case with PD380 label
- Walther PD380 safety and instruction manual
- Two 8-round single-stack steel magazines marked 'PD380' and '.380 ACP - Made in Germany' with finger-rest baseplates
Built around a steel barrel and a black polymer frame, the PD380 maintains a compact footprint with a 3.7 in barrel, 6.48 in overall length, 5.15 in height, and 1.24 in width. Unloaded weight is 20.6 oz, and capacity is 8+1 using the included single-stack magazines.
Controls are fully ambidextrous where specified: the paddle-style magazine release is mirrored, and slide-mounted safety levers are present on both sides. The loaded-chamber viewport provides straightforward status checks. The front and rear slide serrations aid manipulation.
The sighting system uses a 3-dot setup with a white-dot front and an adjustable rear for windage and elevation. Compatibility with Glock-pattern sights gives broad options for sight selection if the owner chooses to change them.
Markings include German CIP N nitro proofs, the DE24 date code, and a WALTHER ARMS FORT SMITH, AR import mark. The slide, barrel, and frame carry matching serial numbers, underscoring the completeness of this example.
An integral MIL-STD-1913 style rail with three slots is molded into the dust cover, and Walther’s Performance Duty grip texture provides a consistent, non-abrasive hold. The black slide finish and black frame maintain a unified, utilitarian look.