Remington Model 7600 .270 Win Pump-Action Rifle, 22 in Barrel, Factory Engraved Walnut, Traditions Scope
This Remington Model 7600 is a U.S.-made pump-action rifle in .270 Win with a standard 22-inch barrel and factory-pressed wildlife engraving. Built in the 1996–2004 era at Ilion, New York, it features a free-floated barrel, open sights, and a gloss-finished walnut stock with a Monte Carlo comb. It comes outfitted with a Traditions variable-power scope with a duplex reticle, installed on rings and bases.
Condition
Overall Condition: Good condition, showing some signs of prior use and handling.
Specific Condition Notes: There are a couple of small pitted spots along with general wear and handling scuffs.
Bore Condition: Good - Clean, well-maintained, minor wear marks.
Bore Rifling: Good Rifling - Intact, well-defined lands and grooves.
What's Included
- Traditions rifle scope with duplex reticle (installed)
- Scope rings and bases (installed)
- 2 detachable 3-round steel box magazines (body stamps observed include "270 WIN." and a multi-caliber long-action list)
The Model 7600 uses a pump-action system with a rotating multi-lug bolt that locks into the barrel extension and runs on dual action bars. It feeds from detachable steel box magazines and carries a 3+1 capacity in .270 Win.
The 22-inch, free-floated barrel is finished in blue and paired with open sights: a ramped front sight and an adjustable rear leaf on a stepped base. The receiver is drilled and tapped for optics, and this rifle is presently set up with a mounted Traditions variable-power scope using a duplex reticle.
The walnut stock shows a gloss finish and a Monte Carlo comb with pressed checkering and sling swivel studs. The matching walnut fore-end is checkered and fitted with a black tip and white spacer. Length of pull measures 13.5 inches for a traditional hunting-rifle fit.
Factory-pressed engraving highlights wildlife scenes: two bears on the left panel and two deer on the right panel. This is the standard 22-inch rifle configuration (not the carbine) and was manufactured in Ilion, New York, USA during the 1996–2004 timeframe.