Marlin Model 1895XLR .45-70 Govt Lever-Action, Stainless, 24 inch Barrel, 2009 JM-Marked with Nikon ProStaff 3-9x40 Scope
This 2009 Marlin Model 1895XLR in .45-70 Govt pairs stainless-steel construction with a gray/green laminated stock and a 24 inch round barrel. It is JM-marked with a North Haven, Connecticut rollmark and comes set up with a Nikon ProStaff 3-9x40 BDC scope on a one-piece rail with 1 inch rings. The rifle is in very good overall condition with an excellent, bright bore and useful field additions including a hammer spur extension and quick-detach sling setup.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: There are light handling marks from prior use. The bore is bright and clean. Please refer to the photos for a complete view of the condition.
What’s Included
- Scope: Nikon ProStaff 3-9x40mm 1" BDC riflescope (mounted)
- Mount: One-piece Picatinny/Weaver receiver scope rail (installed)
- Rings: 1" scope rings (installed)
- Sling: Camo-pattern rifle sling (attached)
- Sling Swivels: Quick-detach sling swivels (installed)
- Hammer Spur: Hammer spur extension (installed)
The Model 1895XLR is a stainless, solid-top, side-eject lever gun chambered in .45-70 Govt and built with a 24 inch round stainless barrel. The barrel features a 1:20 RH twist to stabilize common .45-70 bullet weights and a ramp front sight; sight hood configuration as shown. The tubular magazine has a factory-rated 4+1 capacity.
Its receiver, barrel, magazine tube, lever, and trigger guard plate are finished in a satin/brushed stainless. The laminated hardwood stock and fore-end have diamond-pattern cut checkering, a fluted comb, a pistol-grip profile, and a recoil pad. Approximate factory specs list weight at about 7.0 lb and overall length at about 42.5 inches.
This rifle carries the JM proof mark and a North Haven, Connecticut, U.S.A. rollmark. Safety features include a cross-bolt, hammer-block safety. The action is the proven lever-action design associated with the 1895 series.
Field-ready additions include a one-piece Picatinny/Weaver rail with 1 inch rings and a Nikon ProStaff 3-9x40mm scope with a BDC reticle for practical holdovers. A hammer spur extension improves hammer access around the optic, and quick-detach sling swivels with a camo sling are already installed.