Mutzig Arsenal Model 1777 Carbine Flintlock Muzzleloader, Approx .48 Cal Bore, 30.5" Barrel, Antique French
This antique flintlock carbine follows the French Model 1777 pattern and is associated with the Manufacture d'Armes de Mutzig. It features a 30.5" barrel, a ring-neck cock, and a full-length wooden stock. A crowned inspection cartouche is present at the breech. Caliber is not marked; the bore measures roughly .48 caliber.
Pattern features include a brass pan with integral fence, an oval brass sideplate, and iron/steel trigger guard and buttplate. The stock has a straight wrist, a full fore-end to the muzzle, and a pronounced drop. No separate rear sight is observed, and no distinct front sight or bayonet lug is visible. This muzzle-loading, single-shot flintlock long arm is serial number exempt and qualifies as an antique.
Condition
Overall Condition: Poor condition.
Bore Condition: Poor - Noticeable dirt, stains, significant corrosion or damage.
Bore Type: Smoothbore (no rifling present).
Specific Condition Notes: Metal surfaces show widespread pitting with a patinated finish, along with extensive scratching and blemishes. The two barrel bands are retained on the rifle. The full-length wooden stock shows multiple areas of damage. Sling swivels are absent. The bore exhibits visible rust and pitting.
What’s Included
- Mutzig Arsenal Model 1777 Carbine flintlock muzzleloader (as described)
This French Model 1777 pattern carbine is associated with the Mutzig arsenal, a recognized state manufacturer. It retains hallmark pattern elements such as the brass pan with integral fence, the ring-neck cock, and the brass oval sideplate, reflecting period construction and design.
The carbine is a muzzle-loading, single-shot flintlock with a 30.5" barrel and a full-length wooden stock featuring a straight wrist and pronounced drop. Iron/steel furniture includes the trigger guard and buttplate. Pattern notes indicate two brass barrel bands (mid-band and brass nosecap/front band) and a metal ramrod; the barrel bands are retained on this example.
Sighting equipment is minimal on this specimen. No separate rear sight is observed, and no distinct front sight or bayonet lug is visible, consistent with certain configurations of the pattern and its intended use.
The bore caliber is not marked; measurement indicates roughly .48 caliber. Length of pull measures 14.5 inches. An inspection cartouche topped by a crown is present at the breech forward of the tang. This antique is serial number exempt.