Wilson Combat Project 1 Division 77 Ghost Edition 9mm 1911, Full-Size, 5 in Compensated Fluted Bull Barrel, 18+1, Optic-Cut Slide
The Project 1 is the inaugural model from Wilson Combat’s Division 77 R&D line, offered here in the limited-quantity Ghost Edition with a silver slide over a clear-anodized aluminum frame. This full-size, double-stack 9mm pairs a 5-inch compensated, fluted bull barrel with a ported, optic-cut slide and a multi-footprint interface. It carries a documented factory test target dated 04/16/2026 and a 1-inch at 25 yards, five-shot accuracy guarantee.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Overall Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: There are light handling marks from prior use. Please refer to the photos for detail.
What’s Included
- Original case
- Wilson Combat soft range bag
- Three 18-round double-stack steel magazines with extended basepads
- Factory test target dated 04/16/2026
Built as a Division 77 limited-quantity Ghost Edition, this pistol features a two-tone presentation with a silver slide and a clear-anodized aluminum alloy frame. The large, flared magazine well supports fast reloads for the 18+1 capacity double-stack system.
The slide is extensively engineered with lightening windows, top serrations, stylized grasping cuts, and porting. An integral optic cut uses a multi-footprint interface that accepts Trijicon RMR, Shield RMSc, and Leupold DeltaPoint Pro patterns. The removable cover plate integrates the firing-pin stop and carries a fixed rear sight to help preserve zero when swapping optics.
The 5-inch bull barrel is compensated and fluted, pairing with the ported slide to manage muzzle rise. Wilson reports approximately a 42% reduction in recoil energy versus an EDC X9 baseline, and the pistol carries a 1-inch at 25 yards, five-shot accuracy guarantee.
Controls and ergonomics are classic 1911 single-action with a left-side thumb safety and a beavertail grip safety with a memory bump. A skeletonized three-hole trigger, skeletonized commander-style hammer, and aggressive 3D-textured grip panels with Wilson Combat medallions round out the handling. An accessory rail on the dust cover adds mounting flexibility. Made in the USA.