Remington Model 700 Sendero SF II .300 Win. Mag., Stainless, 26 in Fluted Heavy Barrel, H.S. Precision Stock (2013)
This Remington Model 700 Sendero SF II pairs a stainless, fluted 26 in heavy-contour barrel with a rigid H.S. Precision stock and an externally adjustable X-Mark Pro trigger. The barreled action is stainless throughout, the bolt body is engine-turned, and the receiver is drilled and tapped with stainless Weaver-style bases installed. The barrel code PH indicates June 2013 manufacture at Ilion, New York.
Condition
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Overall Condition: Excellent - Clean, mirror finish, no signs of wear.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: Minor scratches and blemishes are present on exterior surfaces. There are a few small spots of pitting on the barrel exterior and pitting on the rear of the firing pin. The forward scope base is missing a screw.
What’s Included
- Two-piece stainless scope bases installed (Weaver-style)
The Sendero SF II features a stainless steel barreled action with a 26 in fluted heavy-contour barrel and a recessed target crown. Chambered in .300 Win. Mag., it uses an internal box magazine with a hinged floorplate and a 3-round capacity. The 1:10 twist supports a wide range of .30-caliber bullet weights.
The H.S. Precision stock is aramid-fiber reinforced and built around a full-length aluminum bedding block. It includes a beavertail forend, dual palm swells, dual front sling studs, and a recoil pad. Length of pull is 13.5 in, and the stock wears a gray/black webbed finish.
The stainless receiver is drilled and tapped, and two-piece stainless Weaver-style bases are installed. The bolt body is engine-turned (jeweled), and the rifle is equipped with Remington’s single-stage, externally adjustable X-Mark Pro trigger.
Fit and finish are stainless throughout, with a polished/brushed stainless receiver. The rifle is configured without sights. The barrel code PH indicates June 2013 production at Remington’s Ilion, New York facility.