Underwood M1 Carbine .30 Carbine (1943) – WWII Underwood Elliott-Fisher, 18 in Barrel, Early Non‑Lug Band
This Underwood Elliott-Fisher M1 Carbine is a WWII U.S.-made example with a barrel dated 8-43 and a GI Parkerized finish. It features an early non‑lug barrel band, an adjustable rear aperture sight, and an oval-cut walnut stock with GI cartouches and inspector marks. Mixed-maker GI parts are present, including an SG-marked recoil plate and M-marked magazine catch. It comes with an installed OD green GI sling, GI buttstock oiler, an M4 pattern bayonet, and one 15-round magazine. Note: Due to the early non‑lug barrel band, the included M4 bayonet cannot be affixed to the rifle as configured.
Condition
Overall Condition: Fair condition, showing extensive signs of prior use and handling.
Bore Condition: Good - Clean, well-maintained, minor wear marks.
Bore Rifling: Good Rifling - Intact, well-defined lands and grooves.
Specific Condition Notes: The trigger does not reset. The top handguard is not present. Scratches and blemishes are visible across the rifle. A patina is present across the finish. Pitting is present on the barrel finish.
What’s Included
- 1x 15-round steel M1 Carbine magazine (installed)
- M4 pattern bayonet (included; cannot be affixed to the rifle with the current non‑lug barrel band)
- OD green GI web sling (installed)
- GI buttstock oiler (installed)
Manufactured by Underwood Elliott-Fisher during WWII, this carbine reflects August 1943 production with an Underwood-marked barrel bearing the Ordnance flaming bomb. The GI Parkerized finish and correct wartime configuration anchor it to its period of service.
It is fitted with an early non‑lug barrel band. As configured, this band does not accept an M4 bayonet. The rear sight is a fully adjustable aperture type, while the front sight is a protected blade on a pinned base.
The walnut stock is oil-finished with the classic oval sling and oiler slot and a checkered steel buttplate. A U cartouche is present on the stock, and a rack number is marked on the right butt. Parts stamps include an SG-marked recoil plate and an M-marked magazine catch, consistent with mixed-maker GI components.
Mechanically, the carbine uses the short-stroke gas tappet system with a push-button safety. Note the trigger does not reset, and the top handguard is missing. The bore is clean with good rifling. An OD green GI sling, GI buttstock oiler, and a 15-round magazine are installed.
