Radom WZ 29 Custom Sporter Mauser 98 (1934) – 6.5x57mm, 23.6 in Barrel, Polish Eagle Crest, Attributed to Fred Wells
This custom sporting rifle is built on a pre-war Polish F.B. Radom wz.29 Mauser 98 large-ring action dated 1934 and rebarreled to 6.5x57mm. It retains the crowned Polish eagle crest and WZ 29 markings and features controlled-round-feed with an external claw extractor. Attributed to the Wells Rifle Shop of noted gunsmith Fred Wells, it wears a classic sporter-contour barrel and a custom hardwood stock with hand-cut checkering.
Condition
Overall Condition: Fair condition, showing extensive signs of prior use and handling.
Bore Condition: Fair - Generally clean, some residue or smudges, slight corrosion.
Bore Fouling: Severe Fouling - Extensive corrosion, pitting, or erosion.
Bore Rifling: Fair Rifling - Worn rifling, slight loss of definition.
Specific Condition Notes: There are significant markings and areas of surface rust from previous handling and use. The trigger has been upgraded. The bore shows rust and presents in rough condition. Refer to pictures.
What’s Included
- Radom WZ 29 custom sporter bolt-action rifle chambered in 6.5x57mm
Built on a Polish F.B. Radom wz.29 Mauser 98 large-ring action, this rifle uses the controlled-round-feed system with an external claw extractor and the classic Mauser flag safety. The receiver ring is dated 1934, with the crowned Polish eagle crest over F.B. RADOM, and "WZ 29" marked on the receiver bridge.
The rifle is rebarreled to 6.5x57mm with a sporter-contour barrel measuring approximately 23.6 inches. The barrel is marked "6.5x57MM." Sight provisions include a ramped front sight base and a barrel rear-sight island/base.
The custom sporter hardwood stock features hand-cut checkering, a raised cheekpiece, and a pistol grip. An inletted oval fore-end nameplate and an inletted circular fore-end disc add classic sporting details. A black rubber recoil pad with spacer completes the stock setup. Sling attachments include a rear stock stud, a front barrel-band swivel mounted on the barrel, and an additional fore-end swivel stud. Length of pull is approximately 13.5 inches.
Practical field features include a turned-down bolt handle with a checkered knob and an internal staggered 5+1 magazine. Sling attachment points include a rear stock stud along with both a barrel-mounted front swivel and a fore-end swivel stud, aligning with the rifle’s sporting configuration.
Provenance is attributed to custom gunsmith Fred Wells of the Wells Rifle Shop, underscoring the rifle’s custom build and period sporting style on a pre-war Polish Radom Mauser action.
