Winchester Model 97 E-Series Takedown Field Grade 12 Gauge Pump-Action Shotgun, 28 in Barrel, Fixed Modified Choke (1925)
This Winchester Model 97 E-Series Field Grade is a 12 gauge takedown shotgun made in 1925, designed by John M. Browning and built by Winchester Repeating Arms. It features the Model 97's exposed hammer and slam-fire capable action, a 28 in barrel with a fixed Modified choke, and plain walnut furniture. The E-prefix serial range denotes the updated E-Series, and this example has matching serial numbers on the receiver and barrel/takedown extension.
Condition
Overall Condition: Good condition, showing some signs of prior use and handling.
Bore Overall Condition: Good - Clean, well-maintained, minor wear marks.
This firearm shows minor scratches and small blemishes consistent with prior handling. The bore is clean with no inclusions and exhibits minimal to no wear.
What’s Included
- Winchester Model 97 E-Series Takedown Field Grade 12 Gauge shotgun
Designed by John M. Browning and produced from 1897 to 1957, the Winchester Model 97 is one of the most recognizable pump-action shotguns, with over 1,024,700 made. Its exposed hammer and lack of a trigger disconnector make it slam-fire capable, a hallmark feature valued by many Model 97 enthusiasts.
This E-Series example was manufactured in 1925. The E-prefix identifies the updated series, and the takedown configuration retains matching serial numbers on the receiver and the barrel/takedown extension. Right-side ejection with bottom loading and a full-length tubular magazine are standard to the design.
The 28 in barrel is stamped with Winchester patent-date roll marks and carries "12 GA." and "MOD." choke markings. A single front bead provides a clean sight picture, and the fixed Modified choke offers versatile performance with typical 12 gauge loads.
Field Grade configuration means plain, uncheckered walnut furniture. This shotgun wears a pistol-grip walnut stock, a classic corncob walnut fore-end, and a checkered hard-rubber buttplate bearing the Winchester Repeating Arms circular logo. The steel receiver and frame underscore the robust build, and the length of pull measures 14.0 in. Made in the United States.
