Beretta A400 Xtreme Unico Kick-Off 12 Gauge, 26 in Steelium Barrel, Optima-Bore HP, 3.5 in UNICO Chamber
This Beretta A400 Xtreme Unico Kick-Off stands out for its versatile UNICO 3.5 in chambering, proven A400 Blink gas system with rotating bolt, and Beretta Steelium tri-alloy 26 in barrel with Optima-Bore HP. It features the Kick-Off recoil-reduction stock, a ventilated rib with a red fiber-optic front bead, and an aluminum-alloy receiver in a matte gray finish. The shotgun is in excellent overall condition and comes with the factory case, shims, Optima-Choke HP tubes, and accessories. Chokes installed: M. Provided: F, CL.
Condition
Overall Condition: Excellent condition, showing only faint signs of any prior use or handling.
Bore Overall Condition: Excellent - Clean, mirror finish, no signs of wear.
Specific Condition Notes: Minor surface scratches and small blemishes are present on the exterior.
What's Included
- Stock shims
- Sling swivels
- Beretta Optima-Choke HP choke tubes; marked "NO STEEL" and "OK-STEEL CL"
- Choke tool
- Capacity plug
- Oil
- Manual
- Beretta factory hard case (green)
The A400 Xtreme Unico uses Beretta's gas-operated A400 Blink system with a rotating bolt and a 3+1 capacity, delivering fast cycling with 12-gauge loads. The aluminum-alloy receiver wears a matte gray finish, while the gun presents an overall matte black/gray look.
The UNICO chamber is rated for 2 3/4, 3, and 3 1/2 in shells, giving wide load flexibility. The 26 in Steelium tri-alloy steel barrel features the Optima-Bore HP profile and a ventilated rib for a clear sighting plane with a red fiber-optic front bead.
This shotgun uses the Optima-Choke HP system. It arrives with the M choke installed and includes F and CL tubes; the included tubes are marked "NO STEEL" and "OK-STEEL CL" as indicated. This setup pairs with the Optima-Bore HP barrel for tuned pattern performance.
The synthetic black stock integrates Beretta's Kick-Off recoil reduction and has a textured surface for secure handling. A rear sling swivel stud is fitted, and the length of pull measures 14.0 in.
Markings include: "BERETTA – GARDONE V.T. – MADE IN ITALY, OB HP 12 Ga. 89 mm UNICO for 2 3/4" 3" 3 1/2" – 26" – 18.6". Country of origin is Italy (Gardone V.T.).
